I have put new battery in and now camera wont switch off
SOURCE: kodak c613 will not switch on put in new batteries had this camera since xmas
What helped my camra to get working is to make sure you have the right battery.
the kodak easyshare takes only AA/lithium,AA/ni-mi,kaa2hr,AA/zr6 and AA/lr6 and akline too. It does not work for durecell batteries.Hope I helped!
SOURCE: camera wont turn on batteries are new
I had the same problem that the green light turned on then the red one, even though the camera batteries where new.
I found a solution for this problem, hope it works for all as it did for me.
http://www.sendspace.com/file/ysolwv
The link shows the images of the steps you need to follow to fix this problem.
This problem actually is from low batteries or low voltage in the camera, but its not because the batteries are dead, it is because the batteries don't have a good contact with the metal conductors in the camera.
In the images you can see that the camera has a plastic cover for the battery contacts, so the way to fix it is to remove that plastic cover with a small screwdriver, and pop in the new batteries.
With that it should fix the problem. Hope it works.
63 views
Usually answered in minutes!
×