At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please determine what size you are trying to print (A4, Letter, Legal, etc.). The printer is requesting A4 sized paper in the maunal paper feeder becuase either you selected manual feed or the setting for the default try (usually tray 1) is not set to the correct paper size. In your case, make sure the green slide adjustment on tray 1 is set to A4.
If you are in Canada or US then you need to set the default paper size to Letter not A4. Most if not all software you use likely sends the print job in letter format. Because the printer is set in A4 it stops and waits for that size.
on the control panel you should change the settings, like it shows---> Default Paper Size: A4 or Letter Default Paper Type: Plain Manual Feed: Off Tray 1 Size: Any Size Tray 1 Type: Any Type Tray 2 Size: A4 or Letter Tray 2 Type: Heavy 111-130g Tray 3 Size: A4 or Letter Tray 3 Type: Heavy 111-130g
From the Printers & Faxes window, check in the i9950 Printing Preferences, Page Setup tab, for the following settings:
Page Size and Printer Paper Size are both set for the same size (both A4 or both A3).
Printing Type is set for Normal-size Printing
The graphic on the left should now show A4 (or A3) and Normal-size Printing in the legend.
Once that is set, verify from the application you're printing from that these settings are not being changed by the application (Preferences button in the print dialog box).
Press the down arrow twice (Tray Menu)
Press the right arrow twice (MP tray size = C5)
Press either up or down button until display reads 'MP Tray Size = A4'
Press the start/stop button. Green light shows & A4 selected
(See pp 248 - 252 of the manual)
×