Question about Zanussi ZWF1640 Front Load Washer
Hello, I'am Duong, and i have a Electrolux EWF1073 Front Load Washer, it does not working, so it has a error (code E40). When i start it runing, it run above ten minutes then stop, have three "tak" sounds and E40 code on LCD display. And i have check some item as: restart machine/open and close door again and restart/check the door switch but with the obove solution due not fix of the error. Please help me some solution for fix this problem. Thanks, Duong.
I don't have an electrolux, but I have an LG front loader. Mine was giving a simular error code, and I found the drain hose filter was clogged. Bee running fine since
Posted on May 07, 2014
Testimonial: "Thanks Terry Miles, i have aready checked the drain hose, and clean it. But not fixed error. :(("
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check water "forreign object trap". It's under the lid at the bottom of the machine. First drain water by pulling out the hose and pull out the plug. Then unscrew the trap. Have had this E20 error twice. First it was two coins there, next it was a big paperclip. Have worked fine ever since.
Posted on Nov 20, 2011
SOURCE: e40 error code
The E40 error code indicates a loss of electrical power usually but not always due to the door not shutting properly or not locking. But, since you smelled burning it could be any electrical short that blew a fuse and shut the machine down. It could also be the motor windings with the internal overload protector shutting it down.
Posted on Mar 07, 2008
Tips for a great answer:
Dec 01, 2017 | Electrolux Washing Machines
Mar 23, 2016 | Electrolux Washing Machines
Hello plauano - Typically error code E40 indicates that the washer has detected a door switch or main control board problem. Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes (this usually clear most false error codes). If it proves to be ineffective contact a professional to move forward accurately.
Jan 03, 2013 | Frigidaire ATF6000ES Front Load Washer
• The door is not firmly closed. (E40)
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The type of fabric has not been selected by means of
the relevant selector dial.
• The Start/Pause button has not been depressed.
• The Delay Start option has been selected
Please checked those followings.I hope that helps.Thanks.
Feb 13, 2011 | Electrolux EW1209i Front Load Washer /...
May 21, 2010 | Electrolux EW1000i Front Load Washer
May 03, 2010 | Zanussi ZWD1470W Front Load Washer / Dryer
Jan 11, 2010 | Electrolux EW1000i Front Load Washer
Sep 06, 2008 | Electrolux EW1200i Front Load Washer /...
Dec 11, 2007 | Zanussi FJS1225W Front Load Washer
2,959 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: