Question about Pride New Mobility Victory XL 4 Wheel Scooter

Open Question

What causes the optiway fortress to sometimes ignore when the key is inserted.

There is no reaction when the "key" (1/4 in phone jack) is plugged in. Seems to be related to the "brake" lever position (transmission engage or neutral disengage). Sometimes flipping from "brake on" (incredibly the normal operating position) to "off" (free wheeling) and back "on" turns on power. If that doesn't turn on power then lifting the front wheels in freewheeling mode and pushing until the transmission suddenly engages always restores power.

Posted by Anonymous on


3 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 16 Answers

SOURCE: pride celebrity 4 wheel wont turn on

Please Check that your Freewheel Lever is Fully in Position as if is Slightly out of Position it will Not Work,


Posted on Aug 01, 2010



  • 128 Answers

SOURCE: Scooter beeps and won't go. Gear doesn't click into "engaged" mode sometimes. It seems to slip between "engaged" and "freewheel".

sounds to me like the starter solenoid that's what I would replce first , then look towards new battery's if that fails .

Posted on Mar 28, 2014

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a front tire for my Optiway Fortress XL

FIXYA is a question and answer service for free. FIXYA does not sell tires.
You might find a source to purchase a tire using


May 13, 2018 | Cars & Trucks

1 Answer

Replace lost key for Optiway fortress 2001lxs-3

Hi call 1-800-908-8082. .,.cheers

Dec 03, 2016 | Health & Beauty

1 Answer

PLEASE PLEASE a million times what makes my NUMARK IM9 DJ MIXER to sometimes play only one channell .I would really appreciate your help in this regard

If it's not the cables that you are using, it could be a number of things. Bad solder connection or corrosion on one or more ribbon cables. Maybe a weak return contact on a 1/4 inch female jack. Try putting a signal into the mixer and then inserting a male 1/4 inch plug into the different jacks to find out which jacks disconnect the signal when inserted. Even when they are not used these jacks tend to become slightly corroded and the signal is lost. You can give the jacks a burst of contact spray and 'work' a male plug in and out of the jack a dozen times.

Apr 02, 2015 | Numark IM9 4-Channel Mixer and iPod Dock

1 Answer

I am looking for a wire harness diagram for a optiway fortress 1704fs

Hello,i dont know what that is lol.but this site i will give ya is what it says :WWW.ALLDATASHEET.COM
Type in your product & download it to an Adobe Reader + print it & save to a polythene slweeve folder for future.please rate me as in thumbs up 1 to 4 for my answer,i normally only do for the disabled,but scrolling through things,your question caught my disabled,but dont waste my life crying about it lol.whats the point.The site i give ya is free,have a nice day Colin.

Oct 07, 2010 | Health & Beauty

1 Answer

Humming when no input in jack; works fine with rca inserted; worries me that somethings is not right even though works fine with RCA or XLR plugged in, right channel only

Sounds like it could be feedback hum. Is there anything near it that could cause a reaction when unpluged? Such as a turntable, cassette etc. If so move them and see if it goes away. Even then it won't hurt the amp. I think otherwise worry when there's a hum when they are plugged in. PS check any earth connections too!

Jun 21, 2010 | Adcom GFA-5802 2-Channel Amplifier

2 Answers

Picking up and Haning up problems. "Rls" key "Line 1-4" keys

Can you sheck something for me; under your phone where the cables are plugged into, there are 3 types of jacks... 1 jack is to plug the phone into the wall 1 jack is to plug the handset into(picture of phone handset) 1 jack is to plug a headset into(picture of headset)
Check and make sure that the handset is plugged into the handset, and NOT the headset jack... and move the cables if that is the issue. Your problem sounds very familar to your handset being plugged into the wrong jack on the bottom of your phone, and it is more common than you think.

Aug 20, 2009 | NorStar M7324 Telephone

Not finding what you are looking for?
Pride New Mobility Victory XL 4 Wheel Scooter Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1412 Answers


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides