Triumph-adler DC 2018 error C6000 - Kyocera FS-3900DN Laser Printer

Question edited for clarity.

Page 186 of the Technical Manual

https://www.triumph-adler.fr/wp-content/uploads/2022/02/2506ci_3206ci_4006ci_5006ci_6006ci_TechnicalBulletin_20210216-4.pdf

..

clone cartridge or REAL..??????????????????
Triumph Adler DCC 2725 Operation Manual this thing?
thj

did you read the manual first? Y/N? read chapter 10 yet?
the machine needs service, all you can do is RTM read chapter 10..
did you clean all cartridge's contact pins with alcohol.


all a

http://www.fixya.com/support/t25654660-triumph_adler_error_c6000

Thanks alot. It really worked for me, i mean the reseting procedure of menu>service sett>press #+start button+enter same time>enter 163>enter>go down to Execute>click start button. Then Restart machine. Wait a little so it adds toner then say 'ready to copy'. Hope somebody finds it helpful too

http://www.fixya.com/support/t24309309-triumph_adler_dc_2018_error_c6000


Triumph adler DC 2018 error C6000 Kyocera FS 3900DN Laser Printer

Toner sensor problem or Developer problem Description Toner sensor problem
• The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control.
• The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run. Causes Defective toner sensor. Poor contact of the toner sensor connector terminals. Developer problem.

Please get the correct driver here : www.printcountry.com/drivers.asp
www.opendrivers.com/.../printers-free-driver-download.html
www.driversdown.com/driverslist/r_4_1.shtml
Regards, Jay__jy764e

latest firmware for FS-3900DN:
system: 2F9_3000010.004 checksum:5204 version:010.004
engine: S2F9_1000011001 checksum:f7bf version: 011.001

I don't think the problem is in the firmware ...

E0064-001