How can new firmware be obtained

It is recommended to visit the official Casio website or contact Casio customer support for assistance with obtaining the firmware updates for your camera.
Typically, manufacturers make firmware updates available on their official websites under the support or downloads section. You can search for "Casio Exilim V7 firmware update" on a search engine to find the official Casio support page for your camera model. From there, you should be able to locate and download the firmware updates you need.
If you encounter any difficulties or are unable to find the firmware updates on the Casio website, I suggest reaching out to Casio customer support directly for further assistance. They will be able to provide you with the appropriate firmware updates and guide you through the process of updating your Casio Exilim V7 camera.
Please note that when performing firmware updates, it's essential to carefully follow the instructions provided by the manufacturer to avoid any potential issues or complications during the update process.
I hope this helps, and I wish you the best of luck in obtaining the firmware updates for your Casio Exilim V7 camera!

Obtain and install the newest bios update.

It is possible to update the firmware on your unit, provided that the firmware you download is not already installed on the machine.
In order to install the firmware update you would need to :
1. Visit Panasonic's website at Panasonic.com
2. Click on the 'Support' link and then type in your Model No. DMR-EH75
3. Click on 'Drivers and Downloads'
4. You may download the firmware by clicking on the 'Download' link
5.After the firmware has been downloaded, you will need to burn the file unto a CD-R
6. After successfully creating the Firmware disc, place the disc inside the unit to begin the update process
7. The unit will indicate when the update process is finished
8. There is also further detailed instructions on the 'Download instructions' link which is found beside the 'Download' link.
http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Recorders/Drivers-Downloads/model.DMR-EH75VS.D#ts
To obtain additional troubleshooting assistance for your product, please contact our Panasonic Customer Call Center at (800)211-7262. The hours of operation are Monday through Friday 9AM to 9 PM. Saturday and Sunday 10 AM to 7PM Eastern Standard Time. A representative will be available to assist you. Please have your case number, which is listed at the top portion of your email, available at the time of the call.

Hello joe_east,

The Belkin Router's software (firmware) can be occasionally updated. To check for new updates, go to the Belkin Router Setup page http://192.168.2.1/ . The following choices will appear to update firmware and save current settings:

•Select Firmware Update (Near the bottom of the left-hand panel)
From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this Router.
•Firmware update Options:
Firmware Version > #.##.##
Check for New Firmware Version > [Check Firmware]
Update Firmware > [Enter file name/Browse]
[Update]

•NOTE: Please backup your current settings before updating to a new version of firmware. Click Here -> http://192.168.2.1/system_c.stm to go to the Save/Backup current settings page.
•Save/Backup Settings
You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update.
*Saved File name is user.conf*

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Most major brands have a simple method of updating Firmware. You download the FW file, burn it to a disk. Put the disk in the player. The player will recognize the update and handle the update. It may take some time as some files are large.

Warning: Updating with the wrong version of Firmware, or if the process is interrupted, it can render you player useless.

Find the version your player is currently using. Then go to Sony Support to see if there is a newer version available. Hope this helps.

Read Ya,
Z

Chek your settings and make sure it is set to NTSC not PAL. Check the DVD to see if it is PAL format. Good Luck.

You can update your firmware using the Sony Ericsson Update Service available at the Sony Ericsson website. It will check your firmware version and the latest version available on the internet.

The certificate must be obtained by syncing the device to the music service from which you obtained the songs.

I had this problem about a year ago. If all you need is the firmware update they will update it at no charge and they told me if it needs repairs they most likely will not have the parts becaus it is a discontinued model. They also said they did checked it and found no other problems. Sent it in to Icom:
Icom America
2380 116th Ave NE
Bellevue WA 98004
They did the firmware update and sent it back to me free of charge. It works great now and my chart cards work great.