My canon image runner can photocopy but can not print from the network or usb cable,it only gives a beep sound when i send a command.How do i resolve this promblem

https://www.fixya.com/support/t27099474-e350_cannon_ir_2204

Check if 'secret' option or The ID Management feature is not set.
try different document.
try from another computer
try from another os
try with another cable.
try on another port eg. usb, network,

Windows Server 2003/Thin N Computing thin client L300 Printer Epson FX2175 installed with thin client when dos base print command is given 1st page is printed but when 2nd print command is given printer gets offline either switch off printer before giving comman or print from printer properties. Again third page print command is taken by printer (For alternate pages print command printer gets offline automatically)

Do you have the send feature or just scan? If just scan you need to install scan gear to the computer you want to scan to and configure scanner, than can pull scan fro canon to any viewer installed on your computer. If you have the send feature, make a folder on the c drive of the computer , share the folder with all permissions. Touch send on screen, reg. new address, touch file, arrow down to smb file, browser button to see your network, highlight your network, touch down highlight your computer name, enter user name and password as shown, log in to your computer from canon and highlight the shared folder and hit ok. you should now be able to send to that shared folder

The connected digital
camera / video camera
does not support
Camera Direct
Printing.[2001]
Disconnect the cable
from a the digital
camera/video camera,
and press the Reset
button, and then
re-connect the cable.

Sounds like you don't have the proper Vista x64 bit driver installed. It's different from both XP and standard Vista Drivers?
Get it here:
http://www.usa.canon.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2269&modelid=14357

this is not a network problem.because machine is receiving documents thats why light is blinking. check the paper in the tray whether they are of correct size, change the paper size from computer, or call your tech service rep it may be due to usb cable or faulty network cable, or it may be the problem of main communication board of photocopier machine.

guessing its the wrong print driver go to imagerunner ,com and look for different driver

Do you have toner/drum cartridge in machine installed?

Sorry that was actually me...after i posted...it asked me to register...so i did.

Okay, you need to download Canon Network scangear from the Canon website. then take your document...put it on the top feeder...turn you scanner online...open up microsoft word 2003..insert, picture....from scanner or camera select network scangear....custom insert....then scan. The machine needs to be hooked up to a network...but note...a simple cross over cable or usb between pc and the photocopier will not work.