Lg lau180hsv wont work in automatic - American Standard WCZ036F Air Conditioner

That code means that the compressor is drawing too much current when it is trying to start. It is highly unlikely that the main board is bad.

u need to loose it all our,,i mean the outlet water pump,,,,,,or repace the casing with a newone

These units are disposable essentially.

Check if the high pressure switch is open and check discharge pressure. If it is open remove some freon from the unit.

p { margin-bottom: 0.08in; }

It appears that a lot of people can't get their LG KC910 phones to work with AT&T.

Not to fret, I've solved the problem.

Bring up the phone onto the screen.

Enter: 3845#*910#

(You may have to do this a few times because sometimes it will actually try to dial the number.

This puts you in test mode.

Scroll down and select: Network mode

Scroll down and select: Automatic (it's the last item on the menu)

That's it!

Enjoy this great phone and remember: You didn't put one cent into Bill Gates or Steve Jobs pocket.

Pat

PS

I've been having problems with my phone losing network connections lately. When I follow the above instructions, it immediately work again. I'm wondering if when the network frequency changes I loose the "Automatic" status. Because GSM850 is the main frequency where I live I selected that and it works fine. Maybe the new settings need to be "burned" in. Haven't seen an option for this though.

sounds like you need to contact your service provider and explain to them the problem they should be able to send you the settings

Try to smack it

yes you can, just put the mp3 file on folder "Sound" on the external memory, it will be automaticly put  in your playlist mp3 player.

HI THERE, I FIXED THE PROBLEM MYSELF BY KEEPING THE FUNCTION BUTTON ON THE DVD PLAYER PRESSED UNTIL IT FLASHED ""MODE"". THEN I PRESSED IT IN SEQUENCE TILL IT CAME UP WITH DVD/TV THEN IT AUTOMATICALLY SWITCHED OVER TO THE DVD FUNCTION MODE. ALL DONE. BUT THE TV/DVD BUTTON ON REMOTE STILL ISNT FUNCTIONING OR CROSSING OVER CHANNELL. HAVE TO DO IT MANUALLY VIA DVD PLAYER. EVERYTHING ELSE WORKING EXCELLENT. THANKS ANYWAY. HOPE THIS INFORMATION WILL BE OF USE TO YOU IN THE FUTURE. I CUD CHARGE YOU FOR THIS INFORMATION BUT I WONT THIS TIME.... LOL. MERRY CHRISTMAS AND GUDBYE...

Is there anything going on in Control Panel, Power Settings? Such as an auto off? Sometimes getting the monitor to come back on after it goes to "sleep" can be tricky. Usually a keyboard stroke works better than mouse movement. It almost sounds like a hardware problem and I would contact the manufacturer and see if it's still under warranty. I'm assuming the PC it is connected to isn't going off?