Samsung f9000 to denon reciver - Denon AVR-3805 Receiver

Are you trying to get over the air channels? IF you are does your TV have the digital tuner on analog? TV went digital and if you have an analog tuner will need either e new TV or converter box.

that is because the ipod nano can not connect to bluetooth it does not have a bluetooth reciver

direct from Denons website "

Why can't I access Pandora on my Denon networked product?

Please be advised that Pandora has recently altered certain connection requirements which have temporarily blocked our products from connecting to the Pandora service. Our Engineering Dept. is currently working hard to correct this and will have a firmware update available as soon as possible via the internet to resolve this issue. This should not affect your product's ability to receive other music streaming services. Please visit our website for firmware update schedule information after December 6th.
We sincerely apologize for any inconvenience that Pandora's alteration has caused.

Of course. "Home Theater" implies a video capability.

Have you looked at the manuals? They will tell you how to connect the two.

You might find them at the manufacturers' support sites or these guys...

retrevo.com
audio.manualsonline.com
hifiengine.com
usermanualguide.com
vinylengine.com
Google search: "(product) manual"

1. Press systems setup. Then press Enter.
2. Press the left or right arrow to select then press enter.
3. Press up, down, left or right and then make your selection and press enter.
4. Press enter to confirm selection.
5.

First make sure you you have the power plug plugged into the unit and a hot 110 outlet, press the on/standby button on the front of the unit and if no power return to store

WHAT TYPE OF AUDIO CONNECTION IS USED FRON THE SAT TO THE DENON? IT HAS BEEN MY EXPERIENCE THAT YOU MUST CHECK THE OUT PUT FORMAT OF THE SAT OR EVEN USE A COAXIAL OR OPTICAL CABLE AND ON THE FRONT OF THE DENON PRESS THE INPUT MODE BUTTON TO DISPLAY AUTO

Check with DVD Player settings.

I know the avr 1602 well....What exactly do you mean "I have my TV cable service wired to the Denon".....Do you mean the actual co-ax cable ?....

The denon is only able to switch raw video and audio signals.

What do I mean by that ?....IF you are running your co-ax cable from your cable company directly into the back of the denon, it won't work. The Denon has an AM-FM tuner, but not a video tuner ( channels 1-121)....If this is what you are doing, then you want to run it to your samsung first ( as long as the samsung has a tuner so you can change channels ).

If the samsung operates like an old VCR, whereby you can plug the cable company co-ax cable into the back of it, and change channels with the samsung, then that is what you must do. You would then hook up the OUTPUTS of the samsing to the VCR or DVD inputs on the Denon receiver. ( use DVD inputs on the denon if the samsung has optical audio out, and use an optical cable as well for better sound ).

You would then use the Denon for the sound, and hook up your TV to the Monitor out jack on the back of the Denon.

The Denon is like a big switchbox. You plug your DVD, VCR, Satellite, video game, or what-have-you into the Denon. Then you use the denon to route the signal to your TV for the picture, and the denon takes care of the sound.

Hope this helps, and remember to always follow your owners manual.......Rob

REPLACE MUTING TRANSISTORS IN DSP PANEL