My Bosch washing machine Logixx Varioperfect - would not start. Need to check if fuse is blown. Where is it located?

SOURCE: Hi How do you remove the child lock on a Bosch

Hi
Try "dry" & "spin" together for a few seconds. This is the child lock display.
Or press "end of cycle" for over 5 seconds.
Thanks for contacting fixya.com

SOURCE: Bosch washing machine logixx 8 front loader error

Det er for koldt i rommet, eller vandrør har frosset til.Sett opp temperatur i rommet eller tine rør

SOURCE: I have a Bosch Logixx

Hi from retired Englishman in SW France,

Same as 'F16', 'F34' stands for 'door lock (fault)' ;-0)

This is indicating that there is a problem either with the door lock or the door locked sensor requiring a service call, sorry ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Testimonial: "Thanks - the engineer is coming later today. "

SOURCE: washing machine bosch maxx 7 varioperfect

Sounds like have inadvertently activated the child lock. To deselect you need to press and hold the start button for approx 5 secs or until the key light goes out. Hope this helps, please let me know if this works or if you need further assistance.l

SOURCE: Bosch excell 7 varioperfect washing machine will not programme, the key flashes on the display

Dont worry your machine is ok
the flashing key means your child lock is on, and has to be disengaged

What you need to do is press and hold the on/off button for approx 5 seconds This should turn the lock off.

I hope this was useful.