Waste ink absober almost full - Canon PIXMA MP760 All-In-One InkJet Printer

SOURCE: Error code E27

take out long black sponge under print head. wash, dry, replace.

SOURCE: waste ink tank full

Here's the steps for reseting "Waste Ink Full" problem at iP1000

Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)


Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if you ever unpluging AC POWER cable. So try the 2nd method by using ServiceTool for IP1500

Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally


I tell you what. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink watse absorber overflow...

SOURCE: The waste ink absober is full. If a service

You really need a service center for that, some have posted methods to reset here, but when the ink overflows it ruins the printer, and anything it leaks on.Canon customer service can tell you the nearest center. 1-800-828-4040.

KENTRONICS

• 113 Answers
• Posted on Nov 17, 2009

SOURCE: absober waste ink is full. Pls help. error code

you need to replace the absorber waste ink pad and service the printer

Testimonial: "Thank you. Looks like it is not a DIY job."

SOURCE: Waste ink absober full

It's complicated and messy to remove all the covers and lift the entire print engine out to replace the absorbers which are under the printer. After that you need access to the service mode to reset the ink counters. I'm not allowed to give out instructions for service mode and resets.