52 scanner error

SOURCE: 52 scanner error

HP LASER PRINTER ERROR CODE 52 – INCORRECT SCANNER SPEED ERROR


HP LASER PRINTERS 2, 2D, 3, 3D

1. Defective cable laser scanner to dc controller. 

2. Defective laser scanner assembly. 

HP LASER PRINTERS 2P, 2P+, 3P 

1. Bad scanner motor. 

2. bad dc controller. 

HP LASER PRINTERS 3SI, 4SI, 4V

1. Faulty cable assembly. 

2. Scanner motor problem.

3. Defective laser scanner assembly.

4. Defective dc controller. 

HP LASER PRINTERS 4, 4+, 5 

1. Faulty laser scanner cable. 

2. Defective laser scanner assembly.

HP LASER PRINTERS 4L, 4P, 5P, 5L, 5SI 

1. Temporary error. Scanner startup failure.

2. Improperly fitted scanning assembly.

3. Scanner cable problem.

4. Defective laser scanner assembly.

5. Defective dc controller board.

HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100

1. Temporary error. scanner rotation error.

2. Replace contact image sensor. 

4. Replace laser scanner. 

5. Replace cables to laser scanner and engine board
HP LASER PRINTERS  1100, 2100, 4000, 4050, 8000
1. Scanner start up error
2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y.
3. Replace scanner ***'y.
4. Replace the engine board.
5. Replace the D.C. controller only on the 8000.
HP LASER PRINTER 2300 ERROR 52.X
1. A temporary scanner start up error.
2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.
3. Replace the scanner ***'y.
4. Replace the engine board.
HP LASER PRINTERS 4200, 4300 ERROR 52.XX
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
HP COLOR LASER PRINTER 4600, 5500 ERROR 52.XK, 52.XC, 52.XM, 52.XY
1. Error code K - No Black Color.
2. Error code C - No Cyan Color
3. Error code M - No Magenta color
4. Error code Y - No Yellow color
5. Replace laser scanner ***'y
6. Replace the D.C. controller ***'y
HP LASER PRINTERS 5000, 5100
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
4. Replace cable ***'y from scanner to D.C. controller.
HP LASER PRINTERS 8100, 8150
1.Laser scanner error/start up/rotation error
2.Replace laser scanner ***'y.
3.Replace D.C. controller board.
4.Replace cable ***'y from scanner to D.C. controller

HP LASER PRINTER 4500, 4550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner. 
3. Replace D.C. controller ***'y
HP COLOR LASER PRINTERS 4600, 5500
1.Laser scanner error/start up/rotation error.
2.Take the toners out and reseat them, or replace them
3. Replace laser scanner ***'y
4. Replace D.C controller board.

HP LASER PRINTER 8500, 8550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner motor.
3. Replace D.C. controller ***'y

HP LASER PRINTER 9000 

1. Temporary laser scanner error/start up/rotation error

2. Replace laser scanner.
3. Replace upper cable guide assembly.
4. Replace DC controller. 

Milind Shetti

• 829 Answers
• Posted on Mar 22, 2009

SOURCE: 52 scanner error on HP Color Laserjet 2840

The device has experienced an internal hardware error. Recommended Action

1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
2. If the error is still unresolved, contact Hewlett-Packard for technical support to troubleshoot the problem. Call HP for telephone support

SOURCE: HP 1005 Scanner error 6

dear Sirs i have HP 1005 did't work and have this message Scanner Scanner error 6

please if you can help me

Lebanon Raingam

• 4737 Answers
• Posted on Jun 05, 2010

SOURCE: scanner error 52

If you can open it, please reseat the scanner flex cable after turning the machine off. For full details on how to troubleshoot, please refer here.. Hp error code 50 - 59 Good luck. Thanks for using FixYa.

Sandra Lloyd

• 1 Answer
• Posted on Sep 01, 2010

SOURCE: Scanner Error 5 "error message" on my all in one

I had this problem and it had to do with the scan bulb head not recognising the marker. My temporary fix until the bulb is replaced is to turn the printer off, open the top (ADF and all) with the gray button on the right so that it's slightly raised and then switch the printer on. When it comes up, just close and print/scan/copy as usual. Apparently the spring in the arm warped the interior surface where the head moves and it can't line up when it's closed. Hope this helps.