Xts1500 bluetooth earpiece

Please check if the pairing mode is ON in your Bluetooth earpiece.
Kindly share more details of the steps that you follow on your tablet & Bluetooth earpiece.

Turn the bluetooth radio off on your old phone. Turn on the hbs700. Your earpiece should automatically go into pairing mode when it does not detect your old phone. Turn on the bluetooth radio on your new phone and search for your hbs700. Connect to and you're done.

From experience, bluetooth wireless headset is the best. However it may not be handy in listening to the radio. You can try to swap them with others of the same type but be aware of fakes. Fake ones will not pick radio signals.

You probably cannot. Some bluetooth devices act like phones, and others act like earpieces. The Garmin acts like an earpiece to offer a hands-free speakerphone while driving. Your Jabra earpiece wants to pair with a phone, not other earpiece-type device.

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone, PC or other device for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your other device to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

Most bluetooth headsets or earpieces need to be "paired" to the phone before the can be used this usually just means you need to put both devices into pairing mode search (scan) from the phone select your earpiece in the list and enter a security code to complete the initial connection (pair) after that the earpiece can just be turned on and off with normal use

turn on your cell; go to settings; find bluetooth settings;turn on bluetooth; find audio device choose search; then turn off the earpiece the light will be red next: turn on the earpiece again the light will flash blue and, the cell will find the earpiece the earpiece will flash blue slowly; once a minute
close the cell; use the earpiece

I would suggest taking the battery out when the phone is powered on. Replace the battery and try to re-pair the set.

If that doesn't work, then its likely the bluetooth module in your phone is broken. You can validate this by pairing the bluetooth with another handset.

the pass code is always zeros trust me

psp's don't have bluetooth capabilities so you might have to buy an add-on to connect to bluetooth objects