Screen problem screen hit and doesn't show picture

sounds like the drum has past is best if cleaning doesn't fix it.

If your screen shows a clear picture to start with then it is most likely the video card driver. I don't know what you mean by no access to safe mode, but if you can get into safe mode you should be able to uninstall the video driver and restart. Safe mode is usually accessed by hitting F8 before windows starts so as soon as you see a picture on the screen start hitting F8 a few times until you get to the safe mode selection menu.

You have to format your sd card

Good news - don't worry about this TV anymore and just trash it out the moment you buy a new one!

that's probably that your wallpaper isn't fit with your monitor resolution,for example,if your wallpaper size is 1280x1024 but your screen resolution (size) is 1024x768,it doesn't fit your screen and the wallpaper will only show half or even less
to check your current resolution,click
Start->Control Panel->click Appearance and Personalization->Click "adjust screen resolution" on the Display categories
you can see your current resolution and also you can set your resolution
To check the picture resolution,right click on the picture,select properties,click the Summary tab,and it doesn't show the resolution, click Advanced on the Summary tab
But I suggest you to download the wallpaper with a fit size instead of changing the screen resolution,because too high resolution will make your screen goes black
geez,i'm so sorry for my poor english
please rate this solution if it's work and let me know if you still has a problem.and thanks for using Fixya!

does the remote have a aspect button? or maybe it is in the menu? If not let me know and I'll look it up. I have worked on some of these but dont remember them being wide screen

There is a setting which controls how long the picture you have just taken will be displayed on the screen. Maybe adjusting this will help? I hope so.

It does not show the picture after you take it. You have to hit the home button and hit playback. Annoying, I know!

You need to go into the menu function to turn the screen on (this feature saves the batterys)

i have the same problem with my camera it show 5foa 5f08 5e02 with the blue screen