Code 155,0,0 imageCLASS MF4890dw

Canon imageCLASS MF4890dw Owner Manual ,,try this link

Hi . you need to be more specific. but is almost sure that the problem is the image processor board. it need to be replaced .

there is a problem with the main board and need to be replaced

Labels are a tough feed for any printer because the surface tends to be slippery. Yes you should replace your pickup roller or at least clean it with a damp cloth so that the surface is grippy and not coated with paper dust.

Hello, sounds like you need a new fuser.

Canon imageCLASS MF4890dw Fuser Fixing Unit 120 Volt Genuine M1336

Your Printer system software having problem, upgrade system software. please contact canon technician of your area. your own you cannot update that mechine.

Go To Below official Canon Printer Page For Your problem, http://forums.usa.canon.com/t5/errors/FilterErrorHandlerPage

Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For
Canon Printer Support

File Name: Mac_Fax_Ver420_01.dmg

will most likely require a printer installation first just to get the connection.

Yes...Duct tape works wonders. Most of these printer cartridge
have built in chips that match to the printers they were designed for. This is the manufactures way of saying "Hey, we practically gave away our printers, so now you have to pay outrageous prices for the ink"!!! Place the tape on the light and enjoy the savings ;-)

155 - Oxygen Sensor Heater Circuit , Bank 2 Sensor 1 217 - Serial Communication Link
The 217 code indicates the communication bus between two or more of your computers is malfunctioning. The 155 code is one of your rear oxygen sensors malfunctioning.