At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Good Morning Rhonda, this is JK. I understand that your dishwasher will not perform on the wash cycle. From what you described, it sounds as though you may need to replace the timer. This would be the brain behind the dial. Hope this helps!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the lid switch may be loose or broken it happens to me it was washing but never rinse i found out that it was a loose switch this switch prevents the rinse cycle from working with the lid open because of the high speed rinse ,some machines dont work at all, a loose switch makes the machine think the lid is open even if it is closed.good luck.
if the drain pump or drain motor is weak this
is will cause and long time draining or totally not running the drain pump or
drain motor and its cause of totally stop the cycle of washing machine in rinse
time or spin time, because all fully automatic washing machine, after washing
cycle the drain pump or drain motor must be on, to remove water before start
the next cycle. rinse or spin cycle. need to replace the part but dont try it if you dont have idea how to do. call the technician for your safety and not to waste money.
Its either in the lid switch or timer. Examine the lid switch. Try starting the wash cycle and press in on lid switch to make sure it activates. If the lid switch is good and you dont hear the motor trying to activate during wash than its in the timer. Does the timer advance? Please comment me back If you need further assistance.
first place we start is checking the lid switch to make sure its working slowly lift tub lid lower slow and you should here a click if not its snapped if yes have it checked to see if blown. appart from that it would be an internal fault the capacitors in these machines dont last too long
Make sure washer is on a level surface and all four feet adjusted properly. A slight forward lean may help with this problem as the out of balance switch is at the rear.
sounds like the brushes in the motor need replaced dont know if that would fix the dryer prob but it could be the same prob they both use the same motor
×