SOURCE: cant konfigure router, when i type 192.168.0.50 or
Reset using the button on the back the do an ipconfig - so if you ip is 192.168.1.1 try that to get in to the router
SOURCE: i can't configure my dap-1360
There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!
SOURCE: I just got a dap-1360
just make sure that you belong with in the same IP range.
default DAP-1360 IP is 192.168.0.50
username : admin
password :
change your PC IP address to 192.168.0.xxx (e.g. 192.168.0.2)
from there you may choose wizard or manual configuration.
you may change your DAP-1360 IP add according to your network settings in the office and you must change you PC IP address with in the same range.
SOURCE: CAN GET INTO MY ACCES
The web based setup is 192.168.0.50 ,If you have securty on it you will have enter it or do a rest by pushin the reset button 15-30 seconds
SOURCE: access webpage 192.168.0.50 for the dlink DAP-1360 range extender
YES.ALL YOU NEED IS TO LOG IN THE ROUTER UI AND SET IT,
399 views
Usually answered in minutes!
×