Setting time kitchenaid coffee maker model kcm534obo

Either the scale has not been removed or the sensing circuit has failed.

From Kitchenaid, signs a coffee maker needs cleaned;

1, Cleaning indicator light comes on (select models)
2. Excessive brew times
3. Gurgling or other unusual noises during the brew cycle.

So ignoring first condition, does it exhibit either of the remaining two?

If yes, then likely remaining scale. Try letting descaling agent set, up to max period stated by mfg, then start clean cycle.

If no, possible sense failure.

Hello, Diana -

I hope I am correct in thinking yours is a Kitchen Aid model of coffee makers.

If you reside in the USA and if you have not already contacted the KitchenAid company, then this is the the web page with KitchenAid contact information:
https://www.kitchenaid.com/service-and-support.html

You can ask about where to purchase a replacement carafe for your model of KitchenAid coffee maker.

Best wishes.

"Er1" appears on the brew button
timer display:
A button may be jammed. Unplug the
coffee maker and press each button
several times.
https://www.manualslib.com/manual/405651/Kitchenaid-Kcm111ob.html?page=14#manual KitchenAid KCM111OB Use Care Manual Troubleshooting

Generally, I'd start with one part white vinegar to three or four parts water. You may need to run it throught the machine a few times if it's badly blocked

Manuals and guides may be located online at KITCHENAID.COM.

In the upper-right hand corner of the site, click on CUSTOMER CARE and then click on LOCATE MANUALS AND GUIDES.

It will then ask you for your model number.

For an espresso maker, the model number is located on a silver sticker behind the water reservoir. For a coffee maker, the model number is located on a silver sticker underneath the machine.

On the website, type in your model number exactly as it appears on this sticker and click GO.

This will then bring up the literature listing for your particular unit. You will need Adobe Acrobat Reader to view the files.

Also, Kitchenaid Customer Service will send you a physical copy of an instruction manual at no charge if you choose to call them. Their toll-free telephone number is:

1.800.541.6390.

Here is the manual for the coffe maker.

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%20JavaStudio%20Programmable%20Coffee%20Maker.pdf

Good luck

http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=KCM511&siteCd=KAD

If not that model, you should be able to navigate to your particular model. =>

http://www.kitchenaid.com/custserv/service.jsp

Good Luck!

If it's KCM511, follow this link =>

http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=KCM511&siteCd=KAD

If not that model, you should be able to navigate to your particular model. =>

http://www.kitchenaid.com/custserv/service.jsp

Good Luck!

Err2 is a failed heating element. There is no fix or replacement parts sold. I was lucky I had a receipt, even out of the year warranty they(KitchenAid) are still replacing it.

Had the same problem after cleaning. ERR4 is the result of moisture in the electronics. FIRST UNPLUG COFFEE MAKER. Get a long philips screwdriver and remove the 4 screws at the bottom of the coffee maker. Pull the bottom off and carefully unclip the front panel. The circuit card is simply clipped in so it removes nicely by unclipping with your fingers. Now take a hair dryer and dry out the circuit card. Carefully plug the maker back in and verify that the LED nolonger reads ERR4. Reassemble and your back in business!