- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove the case cover from your desktop computer. Remove a cover strip from a PCI expansion slot. Insert the Dynex network card into this PCI slot and secure it with a screw. Replace the cover on the desktop computer. Boot up the computer and when Windows has booted up then insert the Dynex installation CD into the CD drive then install the LAN driver. Connect a LAN cable from the Dynex LAN card to your modem or router etc.
with your VGA card in pci slot locate the vga pci slot in our motherboard insert it firmly. Turn on the pc and make it sure that pc detects your new card and install the vga card driver supported by the manufacturer.
Did you add a video card? If you have an AGP slot, it is best to put the video card in it. If so you need to go into the Device manager. Remove, disable or uninstall the onboard VGA driver. Go ahead and remove the PCI video card driver as well. Power down PC. Make sure monitor is hooked up to the Video Card, not onboard VGA. Power on PC. When Windows loads, it should detect the VGA card first, but if it detects the onboard first, ignore and don't setup onboard first. When Windows detects the card, load the necessary drivers when prompted. There is no need to reinstall the onboard driver for the video unless you wish to hook up two monitors.
I think it needs dusting. do the following: 1.Open your computers cabinet and plug out the LAN card from the PCI slot. 2 Clean the PCI slot and LAN with brush 3. Insert it again in some other PCI slot if your motherboard have . 4. Install the drivers after the windows found the hardware. Hope it work.
Unplug your computer and Install a lan card into any available PCI slot. Restart your computer and install the CD. The CD will load up the drivers when needed. You may have to start your computer once completed.
u can use any brand . there's no problem in that . installation procedure is very simple. just buy a pci lan card. Insert it in the pci slot. Then switch on your computer , insert the driver cd provided with your lan card , then install the appropriate drivers.
Then, you can connect BSNL Broadband by connecting your ADSL modem with your LAN card.
hey
first check ur motherboard have builtin VGA or not. If its builtin vga first disabled the builtin and then install ur ATI vga card on ur AGP or PCI slot it will automatically detects and ask u to install the driver for it
×