When the paper is printed it stuck on the fuse
If the paper is stuck on the fuse, I am assuming you mean the fuser. You will probably have to replace the fuser. You can remove the fuser and try to remove the paper and then reinstall the fuser. Could be a sticky sensor as well.
SOURCE: paper stuck while printing on lexmark X5470
You might have a little paper stuck inside your printer or just clean the pick-up roller with alcool and try it again.
SOURCE: Lexmark 2500 printer paper gets stuck and won't print
. There are rollers that cling on to the paper and move it through
the machine. When the rollers are worn down they do not grip the paper. For a
short fix you can get something rough like sandpaper, brillo pad, etc, and
gently scratch the rollers to give them some traction. This will temporarily
solve your problem until you can get the rollers replaced.
SOURCE: how can i solve this problem? 935.10 service
This is a service error, which will need a technician to diagnose and repair.
Probably a faulty laser scanner assembly.
SOURCE: when I choose default to
Please try to check the your drivers settings. The settings set on your driver will always override the printer settings. Please click on the link below, this will show you how to create custom size forms or paper size. http://bitly.com/nVAsX1 If you need further assistance please contact Lexmark Technical Support.
Please click on the link http://bit.ly/q5DVho to see instructions on how to go about the procedure.
For additional assistance, please contact Lexmark Technical Support
169 views
Usually answered in minutes!
×