How to end turn

Did you try skipping ahead instead of fast forward .

You need to mark the beginning and end of each buttonhole on your blouse and be sure that you stop the end promptly so you can begin the next buttonhole in the right place.

You might try watching some YouTube tutorials.

sewing machine buttonholes Google Search

The first stitch of the row is usually the chain that you ended in the last row. The chain essentially builds the height of the pattern to the next row so the stitches are even height from beginning to end. After you have made the chain, then begin with the first stitch in the next row pattern.

So, if the pattern says to knit 3 (or purl 3), that 3 stitches allows the height for the next row.

If your Pioneer has Mixtrax then it sounds like the short play function. Go into the Mixtrax menu, find the short play option and turn it off.

Here's a manual for a pioneer car stereo, page 11 shows what I mean:
https://catalogs.pioneer-car.eu/Manuals/DEH_X6500DAB_QRD3125_manual/

This just happened to me and confused me no end

Open your Internet browser and navigate to the Samsung PC Studio download page

(see Resources for link).

Click the link next to the operating system you currently have installed on the computer. Momentarily the software begins to download directly to your computer system.

Double-click the downloaded software to load the installation wizard. Click "Next" on the welcome page, then accept the end-user agreement and leave the current installation name and location as-is.

Select "Install" to install the software directly onto the computer system.

Plug the USB data cable into the power connection port on the Samsung L760, then plug the other end of the cable into a USB port on your computer.

Load the software you just installed; the computer automatically detects the hooked-up cell phone.

hope this helps

Begin mode is obtained by pressing [g][7] and it should then show BEGIN in the bottom line of the display. End mode is obtained by pressing [g][8]. End mode does not not show an indicator in the display because it is the default mode, so if BEGIN isn't showing, then the calulator is in End mode.

First, I don't recommend replacing the boot unless you know exactly when it split (such as off roading yesterday) Dirt gets into the joint and even if cleaned they become unreliable. (You can get a remanufactured complete axle assembly or a scrapyard unit at reasonable cost.
Removal begins with the nut on the axle end. (very tight at about 175 foot lbs). Once that is free, remove the brake claiper and rotor. Next, remove the three twelve point bolts behind the bearing hub.
(I use a sacrificial socket and run the bolts out about half an inch and use a hammer to drive them back in to break the hub free) Once the hub is out, you can pull the axle out of the differential right through the hub opening.
Install is the reverse of removal BUT support the axle when putting it back in as there is a seal deep inside the axle tube next to the gear set. If you drag the axle end, you can knock it out and diff lube will begin to leak from the open end of the tube when you drive.
One tip: when doing these, I generally disconnect the tie rod end from the steering knuckle. It makes it easier to work as then you can turn the assembly from side to side to get at the hub bolts.

You weren't precise if the change was due to Daylight Savings Time or just a general need to change the time so I'm giving you the complete set of instructions for changing the time

Setting the Time
Note: Use 24 hour and 60 minute format when setting the time.
For example: 2:00 pm = 14:00.
1. To make changes to your clock’s time setting, you must first put the clock into Program mode. See
section Accessing Program Mode to Update Calendar, Time and DST for instructions. When the
display flashes P1 dAtE, press the ◄ left button until P2 CL oc appears, then press the ● right
button.
2. Press the ◄ left button to choose 12-hour AM/PM display or 24-hour military time, then press the ●
right button.
3. Press the ◄ left button until the correct hour appears, then press the ● right button.
4. Press the ◄ left button until the correct minutes appear, then press the ● right button.
5. When the display flashes the correct time, press the ● right button.
6. The display flashes P2 CL oc again. To make changes to the DST start date or DST end date, press
the ◄ left button one time until P3 BDLE appears in the display and continue to How to Set the
Begin Date for DST. Otherwise, press the ◄ left button several times until END appears, and select
the ● right button to save your updated settings.
How to Disable DST
To disable Daylight Saving Time, set the DST beginning date equal to the ending date (i.e., DST begin
date = 08-03-09; DST end date = 08-03-09).
See next for details regarding setting the DST begin date and end date. Typically, clocks operating in
Arizona, Hawaii and Puerto Rico do not observe DST, and disabling the DST function typically applies to
those areas only.
By default, and unless otherwise modified, DST takes effect on the first Sunday in April and ends on the
last Sunday in October (this was the United States standard through 2006).
How to Set the Begin Date for DST
Note that in 2007 the standard for DST changes to a different start date and end date. The steps below
correct the change in the new start date for DST. The new start date and end date need only be changed
once, since the clock’s rolling calendar function auto-calculates the start date and end date for DST every
year thereafter.
Note that if the begin date for DST has passed, in addition to modifying the begin date (and end date),
you will also need to modify the time.
1. When the display flashes P1 dAtE (see earlier section Accessing Program Mode to Update
Calendar, Time and DST for instruction), press the ◄ left button until P3 bdLt appears, then press
the ● right button.
2. Press the ◄ left button until the correct year appears, then press the ● right button.
3. Press the ◄ left button until the correct month appears, then press the ● right button.
4. Press the ◄ left button until the correct date appears, then press the ● right button.
5. When the display flashes the correct year, month and date, press the ● right button.
6. When the display flashes P3 bdLt, press the ◄ left button once to select next menu option, P4
EdLt, which provides a way to set the end date of the Daylight Saving period.
Setting Daylight Savings Time for model PIX-10/15/21
Page 4 of 4
How to Set the End Date for DST
Note that in 2007 the standard for DST changes to a different start date and end date. The steps below
correct the change in the new end date for DST. The new start date and end date need only be changed
once, since the clock’s rolling calendar function auto-calculates the start date and end date for DST every
year thereafter.
1. When the display flashes P4 EdLt (see conclusion of previous section How to Set the Begin Date
for DST for instruction), press the ● right button.
2. Press the ◄ left button until the correct year appears, then press the ● right button.
3. Press the ◄ left button until the correct month appears, then press the ● right button.
4. Press the ◄ left button until the correct date appears, then press the ● right button.
5. When the display flashes the correct year, month and date, press the ● right button.
6. The display flashes P4 EdLt again. Press the ◄ left button several times until END appears, and
select the ● right button to save your updated settings.
Note: To disable the Daylight Saving Setting, set the beginning and ending date to the same date.

its the psuedo code for a function in some sort of word processing application. basically it looks for a word, noun , phrase or period. and record the position then adds it to a table.. Proberally home work for a programmer i guess.