Open poweredge t300 to replace ram - Dell PowerEdge T300 Server

Windows 2000 is not supported on this machine. The closest you could get is using a hypervisor XenServer or VMWare ESXi and then installing Windows 2000 on a virtual machine.

The e1410 is an error that is reporting an interruption to the CPU processes. It isn't identifying an issue with the processor specifically, it is just saying its processes were interrupted. Normally when you see the E1410 you will see another error listed with it in the hardware log. Do you see any other errors in the log? Also, what is the BIOS and Drac versions at currently? I ask because the server being very out of date can cause issues like this as well.
Let me know what you see.

Your corporate Firewall is denying access. I don't know what this site is or does, but you can put in a request to allow access with your IT guy or use it at home.

Use GOOGLE and SEARCH for:

First Search for:

Dell PowerEdge T300 Server list of Error codes

(12,600 hits)

then search for:

Dell PowerEdge T300 Server Error code "2900-0325"

(You will find 40 'hits')

Anthony

You can try first enabling it from device manager if still not being enable you will need to enable it from your BIOS.

Verify size and type off memory. Also the slots used are a variable. There should be DIMM configuration table on the removable panel or better yet look for the manual.

BIOS must see the optical drive. Re-seat / attach drive if it does not. The other option is to use another drive.

Disassemble Components an Clean the System with Air blower,
& Assemble Components Check it

You will need the drivers for them i had a similar problem
insted of reinstalling windows i got a very old taty keyboard and mose from a windows 95 pc
and used them till i got and installed the drivers for them.

;)

NIC teaming is useless unless you have a switch that support teaming.
However, Dell servers have free lifetime phone support ((800) 945-3355).
They should be able to help.