Brother MFC 4420C prints plain sheets of paper.

Download the user manual here Brother mfc 255cw manual

The manual doesn't say it will do double sided copies. it will copy two pages to one sheet of paper or 4 pages to one sheet of paper. you will probably have to make a copy of the document and then reload the paper back into the tray. experiment with it like put it in face down or face up then which is the top of the page. you can use a marker on a blank sheet of paper to see how it prints out.
hope this helps

I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were printing fine. I tried cleaning numerous time( 50 -100 times over 1-2 weeks ). Still no improvement. The way I print now is:
1. I go to Printer Properties
2. Change Media type from "Plain Paper" to "Inkjet Paper".
3. Change Quality to "Photo".

This takes a long time to print 1-2 minutes per page. However, this works for me since this is my Home printer and use it for printing only few pages here are there.

Good Luck
RK

Press 'Menu', '2', '4', '1'. Report Setting is displayed. Press down arrow to select "on + image". Press 'OK'. Press 'Stop/Exit'. Reference page 70 in this link to MFC 8460n on the Brother site.
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_8460N_8660DN_8670DN_8860DN_8870DW_EN_1586.PDF

Look on page 70 of this link to Brother MFC 8460N Users Guide.
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_8460N_8660DN_8670DN_8860DN_8870DW_EN_1586.PDF
You are welcome.

if you filled the ink with some of the kits, the ink was not totally compatible with brother printer, and most likely dried inside. if that is not the case, do the cleaning from the brother menu screen for all ink cartridges. if you under warranty call brother. it might take a while to fix, since they may send a local tech to replace the head since that is mostlikely issue. if out of warranty, you best likey choice, curb it and get new one with extended warranty.

Hi Phillip,
If you have changed the drum and toner, then check the fuser unit. The teflon coating on fuser film could be worn.

S88

need to go in the menu and change setting

http://www.retrevo.com/s/Brother-MFC-8220-Multifunction-Printers-review-manual/id/260ag204/t/1-2/

Printer thinks its out of paper when its not. Displays messsage "Check Paper - Reload Paper." Have emptied and replaced paper stack several times. No visible jam. Have shut down and restarted. Still not fixed.

My printer has funn ink cartridges and it is printing blank pages and it is saying that the ink is empty. Please help