RCA RTD206 I LOADS THE DISC THEN IT SAYS LOADING THEN THE SCREEN READS OPEN AND DOES NOT PLAY DISC.

It is called the pladder motor, causes no B+ to the motor "5volts" the pladder motor is defective, or the laser pickup is not in sync with the pladder motor.

Hello
The Sled Motor is defective. this is the motor, whic spins the disc as it has been loaded properly. If the loader mechanism loads the disc properly into place and if the catch up magnet catches the disc in place, and still the dis do not spins, replace the sled motor. OK.

This is a work-around rather than a solution. We put an audio CD in the tray and after closing the tray the unit begins to play the music. After waiting a few seconds we open the tray and quickly substitute a DVD and it loads OK. We had also tried cleaning the player to no avail. The CD approach is a pain but it does allow us to play DVDs. Jim

If your PS2 works fine with most of the games and won’t play a few..Then you should try this trick to play them too on your PS2:

1. Turn on your PS2 without inserting any disc.
2. Menu screen will appear like:
3. Press the (triangle) Button to enter Version Information Menu that looks like
4. Highlight the Play Station Driver as above and again press (triangle).
5. New screen will appear like
6. Highlight the Disc Speed as above and press X button,to enter Disc Speed Menu
7. And set it from Standard to "Fast".
8. After you set Disc Speed to Fast, Press and Hold Reset Button to turn off your console.
9. Then again Press and Hold Reset Button till the Blue Light turns on.
10. Remove the Reset Button and Press it again.

Be patient and wait till the game loads itself. If your lens is in good condition then it will play game in first go else try again till it PLAY your game. If still your Grand Turismo 4 DVD wont work then you must clean your PS2 lens.Watch following video to learn about cleaning lens:
Thank you and Good Luck!

send it in to get fixed, or you can fix it by stopping the heat from the back, but i dont think that will work. try cleaning your laser.

you are a *****

It is very possible that the lens motor has burnt out. Sometimes the capacitors on the motherborard short out causing the gear timing to go out..

The only thing you can do to fix this is to take the cover off. Get cotton swab and dip it rubbing alcohol and clean the glass laser eye with it.

Are these factory DVD's? Or burned ones? Als, are you loading te disc correctly. I have a PowerAcoustic and the DVD MUST be loadedupside down.

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

i have a rca disk changer model rtd206.my question is what is the remote control code

This is an indication that the optics are either dirty or failing. Carefully open up the unit and clean the lens using a cotton swab and alcohol. That should resolve the problem. If not, try playing a music CD. If the CD plays but a DVD does not, the optics are failing and need to be replaced.
Dan