There is no factory recall on my pod xt pro - Line 6 New Line 6 Pod Xt Podxt Live Multi-effects Guitar Pedal

I would suggest a reboot first, then if that doesn't fix it, contact Line 6 customer support. Video Tutorial POD HD300 400 Factory Reset POD HD300 400 Knowledge Base...

Try doing a reset as explained in this video-
http://line6.com/support/page/kb/_/pod/pod-hd300400/video-tutorial-pod-hd300-400-factory-reset-r214

The original factory settings of the AW4416 can be restored by recalling Scene Memory '00'.

1) Press the [SCENE] button in the 'AUTOMATION' section.

2) Press the [F1] button to display the 'Scene Mem' page.

3) Turn the (DATA/JOG) dial to select '00.Initial Data' on the screen.

4) Press the yellow [ENTER] button.


Reference: Operation Guide, p. 203

It sounds like the pots need replacing if re-soldering didn't work. i would take it to a Line 6 authorized service center.

Line 6

I would FIRST suspect that the power into the unit might have an intermittent connection. It would probably reset everything if the power momentarily breaks. Power jacks are NOTORIOUS for this problem.

The Marshall is a super clean acoustic amp.

The POD is overloading the amp.

Try the electric guitar input and keep the gain on the amp down, keep the EQ level and use the POD and the end volume to adjust the final volume.

The normal inputs is for a low output acoustic pickup - the POD is a high output electronic source.

Start with the Marshall gains low and get the clean sound good, then work on the gritty sound.

The amp is voiced for a sweet clean sound - if you want grit'n'ball change to a 50w Marshall valve head and a 4 X 12 cabinet.

Horses for courses

press knob 1 and 2 and rec at the same time , then power on , then knob bank D , power off and on ,,,,, ready
Greetings Gerrie ( Holland )

zoom GFX-8:
The All Initialize/Factory Recall function is a special function
that lets you reset the GFX-8 to the condition in which it was originally shipped. When All Initialize is performed, all settings of the unit including all user group patches are returned to the default condition. Factory Recall can be used to reset only specific user group patches group to the default settings.
1. Turn power to the GFX-8 on while keeping the STORE key depressed.The display shows "ALL-INIT".
• To perform All Initialize, Continue with the next step.
• To perform Factory Recall, Use the BANK UP/DOWN foot switch and foot switches 1 - 4 to select the patch (from a user group) that you want to return to the factory default condition.
2. Press the STORE key once more.
All Initialize or Factory Recall is carried out.
If All Initialize was carried out,
the unit automatically returns to the play mode.
Note that when All Initialize is executed,
the contents of all patches stored by the user will be overwritten (erased).
When wishing to cancel All Initialize/Factory Recall,
press the EDIT/CANCEL key before step 2.
source: ZOOM GFX-8 User Manual.

Read this cut and paste and verify compatibility as a first step:

<<<
*FBV is not compatible with Spider II 15 or Spider III 15.

**FBV is only compatible with POD 2.0 units with pedal jacks labelled "FBV Pedal." It is not compatible with older units which have pedal jacks labelled simply "Pedal."

(NOTE: FBV is NOT compatible with Ax212™, Flextone™ I, II or HD, POD® Pro, Bass POD®, Bass POD® Pro and Spider™.)
>>>

Note there are apparently several versions. Check compatibility at this site:

http://line6.com/footcontrollers/fbv.html