Error code E15 flashing, machine does notrespond

in most cases powering it off for 5 min and back on clears the memory, so if the error code is not clearing or coming back this suggests the error is still present and you'll need to call for service.

This is a flood sensor issue rather than a float switch issue. The sensor is in the tray and senses water from dripping hoses or worn pump seals. It doesn't need much water as the sensor is at the lowest point, so it only needs a teaspoon of water. you can check the connections at sensor end and follow it to the control board connector.

My Bosch Dishwasher is displaying an error code E15, what does it mean? An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated.

E15 Bosch Dishwasher Error Code

Videos as well with fixes

https://www.google.com/search?q=bosch+dishwasher+has+a+E15

..

First you have to fix where the leak is coming from that tripped to E15 error code. You can reset by turning off power for 15 minutes.

An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated. What can I do to fix the E15 Error Code on my dishwasher?

E15 Bosch Dishwasher Error Code

.https://www.google.com/search?q=dishwasher+e15+error

...

well at least we got the 'make (what it is)' part :>D

https://www.ukwhitegoods.co.uk/forums/forum/public-support-forums/help-and-support/cooker-and-oven-forum/81615-rosieres-oven-rfa54-vin-error-code-e15

More here

https://www.google.com/search?q=rosieres+wall+oven+e15+error+code

..

Control board fault. See... https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e15-error-on-a-hoover-washing-machine

Good Morning friend, thanks for your post!
I see your Electrolux range is displaying "E15" error code and you have reset your appliance but continue to receive the message. An "E15" error code stands for ESEC (Electronic Surface Element Control) self-test failed which could be a possible issue with your relay board or UIB (User Interface Board). I suggest seeking assistance from a technician to properly diagnose and repair your appliance to avoid any unnecessary part purchases. -Matt

my washing machine HOOVER DST 10146 P is showing error code E15 what does it mean and how to fix it?

Error code E15 means pump time out, that it is to say the water is not pumping out enough in the time alloted by the control module.
There must be some kind of blockage or restriction in the pump or the outlet hose, so you need to check these.
Please rate my solution.
Thanks.

E15 "Check Outlet Pipes". Normally this is a blockage in the pipe or the filter connected to the drum.

Error code 15: Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not
blocked.

What you need to be sure of, is whether when the error telling you to check for blockages in the outlet pipes happens, it's actually an accurate indication of the fault. I dislike these stupid error codes as they often fire off erroneously and cause no end of trouble.

It can also mean a faulty control panel.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

www.sewingmanuals.net