Touch Screen and Remote Problem

go to settings , keyboards and turn off all of the corections if that dont wotk you have prob. with the touch or some watter damage

You need to replace touch pad. Parts cost around $25. Fairly easy to replace. Once you see it you will know how to replace, Go on ebay and put in lg vu touch screen and you should pull up parts for your phone. Or just google lg vu replacement touch.

try calibrating the screen, its most likely in the tools section, but if the screen is messed up like that then
you may have a hard time getting there.

The problem is the screen needs to be calibrated, however this sometimes doesn't work if the touch screen is failing. I saw a lengthy procedure posted here in a different solution I have yet to try. But for the calibration you will go to menu - > display -> press FIND and follow the directions on screen. If calibration fails repeat, or find the other lengthy instructions here and try those. Several people claim they have worked, again, I haven't tried them. Another option is to purchase a remote for the unit. I have one and use it for mine because my screen totally failed. I have since replaced the screen with a junk unit I purchased on EBay but prefer the remote over the touch screen for most things. Remotes are about $30 bucks. If you're lucky you might be able to find a 2610 that includes a remote for around $50 and pick up an extra set of accessories. Good luck and post back if you have any other questions.

If you think the touch screen is not responding properly, press and hold the Power button until the
Calibration screen appears. Follow the on-screen instructions.

try to calabrate the touch screen if it dosnt work replace the touch screen part# CSX1085

Here is the cal.txt I used for my 720

929 86 480 75

It is really close to perfect
open a text file put these numbers in save as cal.txt copy this file connect tt to computer go to explorer/aka file manager find tomtom drive and paste it in.
That is it. test it out.

The following information describes how to register userIDs and usernames, login names, and passwords for authenticating accesses attempted through the network for scanning services, and impose restrictions on the maximum number of pages to be copied or scanned. Up to 500 user accounts can be registered.
NOTE: You must be a System Administrator to perform this solution.

1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.
   
   NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.
   
   
4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
5. Select [System Settings]. The System Settings screen will be displayed.
6. Select [Login / Auditron Administration]. The Login Setup / Auditron Administration screen will be displayed.
7. Select [Create / Check User Accounts]. The Create / Check User Accounts screen will be displayed.
8. Select a user account number or use the numeric keypad to enter a user account number in the Go to (001-500) field.
9. Select [Create / Delete]. The User Account screen will be displayed.
10. Enter a userID using the keypad on the Touch Screen, and then select [Save]. The Create / Delete screen will be displayed.
11. Select from the following options:
    • UserID: Allows a userID to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • User Name: Allows a username to be entered using the keyboard on the Touch Screen. Up to 32 alphanumeric characters can be entered including spaces.
    • Password: Allows a password to be entered using the keyboard on the Touch Screen. 4 to 12 alphanumeric characters can be entered. The Password button is also displayed if a password was selected on the Login Setup / Auditron Mode screen.
    • Remote Login Settings: The following settings can be modified on this screen:
      • Login Name - Allows a login name to be programmed that needs to be entered when the machine is accessed through the network.
      • Password - Allows a password to be programmed that needs to be entered when the machine is accessed through the network.
    • Account Limit: Select [Copy Service] or [Scan Service], and then select [Account Limit]. Using the numeric keypad on the Control Panel, specify and restrict the maximum number of pages to be copied or scanned for the account. The maximum number can be entered within the range of 1-9,999,999 pages.
    • Reset Total Impressions: Deletes all data tracked for the selected account.
    • Reset Account: Clears all settings and data for the selected account.
12. Select [Save].
13. Select [Close] three times.
14. Select [Exit].

I havn't tried this yet but I will tomorrow.

Per the Manual,

To calibrate the touchscreen:

1. Press the remote or unit MENU key.
2. Select Display
3. Press the remote or unit FIND key to begin calibration.
4. Follow the on-screen instructions

Hope this helps!