No disk in driver I am using a memory card reader

ur smart card has no problem, problem have with ur system's USB Drivers , reinstall or update ur system's usb driver ur smart card will easily connect

When you are using SDXD cards in a SD card reader for instance, it won't work.
take care when buying a new card reader, because lots of stores still sell card readers, not compatible with the SDXC cards. All SD cards above 32GB are SDXC.

Hello there,

If the scan disk already have the photo on it, then it is easy to download pictures from it to your computer, all you need to do so is a scan disk trans flash adapter also known as the memory card reader. You will insert your memory card into the scan disk if it is the small memory card. then you connect the scan disk into the computer through the SD slot on the computer and then the computer will read its drivers and then you can open file to view folders on the memory card. from there you will be able to transfer your pictures to the computer.

If your computer does not have the SD slot, then you can use the USB type of memory card reader to carry out the operation.

Thank you for using fixya.
Caseytech

You should be able to plug the device in. Most operating systems will recognize the device and treat it as new hard drive.

Are you getting a request for a driver? If so, first let Windows look for the driver.

This type of camera is mostly designed and made in China, and is usually unsupported in vista. For XP you can try installing the driver came in a CD along with your device.
You can also try for alternate way.
If the camera uses a memory card, you can buy a card reader.
Then you do not have to install any of the software that came with the camera.
Any store that sells digital cameras will sell memory card readers.
Prices run from $10 to $20.
You can attach the card reader to your computer USB port and Vista will recognize the reader as being a new hard disk. Vista will load the correct drivers.
After that is done, install the memory card (full of photos) into the card reader.
Then you can use Windows Explorer or My Computer to find the new hard disk (which will be the memory card). Use drag and drop to move the photos to your computer.

I think you will find the drivers here

http://www.dynexproducts.com/t-drivers.aspx

If this helps please vote

Yes it is really plug into slot and use but it won't work at all if you won't install drivers. So please go to Sony's website and choose your model there and then download n install drivers. Thats it. Simple or not ?

You can only form sd Hc if your card reader is approved for SDHC use. It should tell you that on the outside of the card reader or in the documentation of the card reader.

If your drive isn't formatting 2gb, it could be that the driver was designed prior to 2gb cards being released. You could look for a new driver or replace it with a card reader that supports SD HC use as will as a 2 gb SD drive.

Generally card readers will either come with a built in driver, or it would come with a driver disk. You may need to visit the website of the card reader to check for downloadable drivers is possible.

Well basically what you do is
1.) connect your memory card reader
2.) install the necessary drivers
3.) insert the memory card and it should show up as a removable disk in my computer similar to that of a pen)flash) drive

If the card reader is built into the computer then simply ensure the necessary drivers are installed (right click computer and select properties, then click device manager , it will show up in the list, if it has a yellow maker then it has a problem if its a question mark then it aint installed) if you dont have the drivers get them from the manufactures web page. IF everything checks out ok then put in the memory card and it will show up as a removable disk in my computer..

If you dont have a memory card reader or dont have the card reader built in then you will need to purchase one.