How to raise glass top on maytag electric range

your Maytag range has only a single heating element located at the top of the oven, it is likely a "broil" element, which is used primarily for cooking food close to the top of the oven. The lower heating element, which is typically used for baking and roasting, may be hidden beneath the oven floor or located at the bottom of the oven.
If your oven is not getting very hot, it is possible that the broil element is malfunctioning and needs to be replaced. However, if the oven is not heating evenly or is not getting hot enough to cook food properly, it may be a more complex issue related to the temperature sensor, the control board, or other components.
To diagnose and repair the issue, it is recommended to have the range serviced by a qualified technician, who can properly identify the model and locate the faulty component. The model number of your range can typically be found on a label inside the oven door, on the back of the range, or on a storage drawer beneath the oven.

without knowing the model I'm going to give you the most probable issue.
The wires that connect to the element plug in have become brittle and bad there's no more connection.. they need to be repaired.
I'm sure you know this but....shut off power to the unit while working on it.
best to you.

Sounds like you need an bake element ignitor if the bake doesn't work but if the broil also doesn't work, it could be the electronic clock/timer control. the part number for the bake ignitor is 8054129 .Best off to call a reliable service company such as Sears.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} It could be that your lower element is burnt out or ready to burn out. They last 3-5 years depending how much you use your stove.
Disconnect POWER to the stove, remove the screws holding the lower element to the back of the inside of the stove, pull out carefully and remove the 2 screws holding the wires on. Check the element with an ohm meter, it should read 0 (zero or very close) resistance on an ohm meter. You may also take it to a store that sells replacements ($25) and they may check it for you.

absolutely nothing, they are cycling properly to keep the glass top hot
you are not cooking wioth the heat of the element,
but with the heat the glass absorbs from the element
if they are all doing it,,,, it is normal trust me
i have handled this call about 500 times since glass tops first hit the market

I have an electric oven that is turning on but not heating up. The oven, broiler, & stove top are not heating up. Any easy solutions to this?

1. After self cleaning the range the door won't open
   
2. Ceran glass cooktop and how to keep it clean
   
3. Changing a basic bake element
   
4. Checking a range element
   
5. Checking a surface switch
   
6. Checking the terminal block of a range element
   
7. Checking an common oven temp sensor
   
8. Checking an oven temp sensor: What does an oven temp sensor look like ??
   
9. How to adjust a standard controlled oven temperature
   
10. How to adjust the oven temp on some common electronic controlled ovens
    
11. Help for storing an appliance
    
12. How to test many brands of Ranges that are flashing a F1 fault code
    
13. Important disclaimer
    
14. My electric oven will not heat
    
15. My Range is flashing an " F1 F2 F3 F4 F5 F7 F9 " something, what does this mean??
    
16. My surface element stays red all the time, it seems to have no low heat
    
17. My whole range is totally dead...help!
    
18. My bake element just caught fire...help!!
    
19. Oven door and door hinge help
    
20. Oven temperature seems to be incorrect
    
21. Oven temp sensor - how to change helps
    
22. Replacing an old style bake/broil relay
    
23. Some "how to set the self clean" on my range
    
24. Stainless Steel Cleaning
    
25. Wiring help for the 4 prone receptacle
    
26. Wiring a replacement surface element switch WB21X5243
    

You are probably going to find the lower heating element has failed. Your symptoms describe that failure exactly.

Reply back if you want instruction as to how to repair.

wen it became hot the water content from air turned it off.

You have faulty regulator, or the element is faulty., not sure how you access the inside.
Hope this helps.