Huawei MA5616 ETH port and GE0 port ?

In version V800R306, the service port cannot be activated or deactivated, but only the user port can be activated and deactivated. For example, to deactivate ADSL port 0/1/0, do as follows:
MA5616(config-if-adsl-0/1)#deactivate
{ portid<U><0,63>'all<K> }:0
Command:
deactivate 0
In version V800R307, both the port and the service port can be deactivated. For example, deactivate service port 31, do as follows:
MA5616(config)#service-port 31 adminstatus disable
Huawei MA5616 DSLAM Access Network Thunder link com

Yes, MA5616 do support vectoring, but it will require CCUE board, software will be V800R313C00, power board should be high power DC, also the VDSL2 board should be 48 ports VDSL2 board VCMM.

Huawei H837ASPB has the same functions as H838ASPB; therefore, H837ASPB can substitute for H838ASPB.
Compared with Huawei H837ASPB/H838ASPB, H839ASPB supports a new function: direct current-isolated (DC-I) grounding.
More related:
Huawei MA5616
Huawei DSLAM,
Huawei ADPE

Huawei CCUB is the main control board of Huawei MA5616 equipment, it has three daughter boards: GE1A, GP1A and EPIA.

GE1A is 2*GE Ports, GP1A is 1*GPON+1*GE Portsm EP1A is 1*EPON+1*GE Ports, however, GP1A is by default.

Huawei MA5616 Gold Line
Huawei MA5616 Silver Line

Changing the service VLAN to which an Huawei xDSL port belongs means changing the service port configuration, namely, the PVC configuration, of an xDSL port. To change the service VLAN, run the undo service-port command to delete the service ports (PVCs), and then configure a new VLAN for the Huawei xDSL port.
The prerequisites for deleting a service port are as follows:
When you specify parameters, all the matched service ports will be deleted.
A service port cannot be deleted in the following conditions:
The port is encapsulated as PPPoA, IPoA, or Auto.
The port contains the BTV user.
The port is bound with an IP address or a MAC address.
The port is configured with a static MAC address.

Huawei MA5600
Huawei MA5616
Huawei DSLAM

A: The networking environments are different and the device uses different boards. Therefore, the reference value of the MTBF of the Huawei MA5600 is 55 years and the reference value of the MTTR of the Field Replaceable Unit (FRU) is two hours. The preceding values are only for reference. For details, contact the related www.thunder-link.com

More suggestions:
Huawei MA5616
Huawei DSLAM

Yes, but the 64 ADSL2+ ports board price is high, also have requirement on main control board which may make your cost high, so suggests for small site purchase the Huawei DSLAM with 128 ADSL2+, if need more than that consider big MA5616 MA5600 or 2 units MA5616 using cascading.
http://www.thunder-link.com/HUAWEI-DSLAM_c126.html

Yes, Huanetwork has experienced technical team on Huawei xDSL solution, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty. Huawei Distributor Huawei Switch Huawei Router Huanetwork com

The dir view, file! Then connect to the TFTP or FTP, use the put command to output, get command to import.More information about MA5616, you can visit:http://www.huanetwork.com/huawei-ma5616-price_p3806.html