500gb book hard drive

SOURCE: I have a Western Digital

Hello,

Try replacing the HDD cable & check jumpers on HDD on right mode (Primary/secondary/cable-select.

If above is ok. Go to your bios setup & check whether it is detected there. try loading Bios defaults.

Hope above helps.

SOURCE: The file system of my hard drive become RAW.

http://www.z-a-recovery.com/unformat-tutorial.htm

This tutorial describes the procedure to recover one volume when

• the volume was accidentally formatted
• Windows reports the volume is "raw filesystem", or "not formatted"
• An external drive failed, either flash (so called "thumb drive") or an hard disk connected using USB or FireWire enclosure.
• MFT is corrupt on the NTFS volume, rendering filesystem partially or completely unreadable

The recovery is done in seven steps, requiring about eleven (11) mouse clicks. Note: The older than current versions of ZAR might have been used to create the screenshots in this tutorial. We did not update the screenshots if there is no significant difference between older and current versions. If you see some option in the program which is not described in the tutorial, just leave it at its default setting.

Step 1 - Get, install, and start ZAR
Download and install ZAR just like you do with any regular program.
When you run it, ZAR displays the window like the one below:

1. Click "Next >>"

Step 2 - Select processing mode

1. Select "Recover data from a simple volume or from a functional RAID volume"
2. Click "Next >>"

Step 3 - Select physical device to recover

1. Select the appropriate hard drive
2. Click "Next >>" for a list of volumes (logical disks) on this hard drive

SOURCE: 500GB MY BOOK hard drive.how to clear "disk error" & use again?

when you reboot your computer, do not have the hard drive attached. As far as the error goes, im not to sure about that.

SOURCE: now that i have plugged everything in on my

Once you have it connected to your pc, the pc should have an icon in the task bar by the clock saying installing device, once it has finished it will say device installed & is ready for use. You will then see a new hdd under the my computer icon. You can then use your drive as you wish. Hope this helps.

SOURCE: Need a user guide for

Here's the direct link for your Seagate user manual. click this (Seagate 500 GB free Agent External Hard Drive user Manual). Open the link and it'll automatically open up on your browser. Once it's opened, click the save button (as shown below) and save it on your computer. Or you can print the documents (45 pages).
It'll be downloaded as Pdf file so you'll need to have installed a pdf reader like adobe reader. You can download adobe reader from this link Adobe Reader.

If you need further help, let me know.

Good luck.

Thanks for using FixYa.