How do I change time on model WS-9160U-1T

https://www.manualslib.com/manual/1023320/La-Crosse-Ws-9160u-It.html?page=2#manual

If this is a digital thermometer made by lacrosse, https://www.lacrossetechnology.com/media/catalog/product/w/s/ws-9160u-it_manual_112515.pdf
'if it isn't can you please comment with the make and model of the device?

Question edited for clarity. Full 'make model (what it is)'.

Did you put batteries in both units and in the right order, sensor first?

Step 1: Insert 2 fresh AA, batteries into the TX29U-IT sensor according to the polarity marked in the battery compartment.

Step 2: Insert 2 fresh AAA, Alkaline batteries into the wireless thermometer according to the polarity markings. Step 3: After 5 minutes place sensor outside in a shaded location.

https://www.lacrossetechnology.com/products/WS-9160U-IT#support

Retired unit so no further warranty or parts.

You can still get one on Amazon

La Crosse Technology WS-9160U-IT Digital Thermometer ...

Amazon.ca https://www.amazon.ca > Technology-WS-9160U-Digita...

Digital thermometer with wireless remote and clock; Remote sensor transmits from up to 330 feet; records daily high and low temperatures; Receives weather ...
Rating: 4.4 · ‎ 7,970 reviews · ‎ $31.50 · ‎ In stock
..

Free manual online:

https://www.lacrossetechnology.com/media/catalog/product/w/s/ws-9160u-it_manual_112515.pdf


https://www.lacrossetechnology.com/media/catalog/product/w/s/ws-9160u-it_manual_112515.pdf

not sure if this link will help you out but have a look you might find something that might help.... How to set time ws 9160u it Google Search

What make and model phone?

Visit www.citizenwatches.com
Choose TECHNICAL SUPPORT and solve all problems.

We set the time zone to '7' , which is Hawaii time zone where there is no change for daylight savings. This came up because it changed automatically on this morning...and although we can change it back, then it won't change next week when it should. So we're hoping that by setting it to Hawaii it will be a regular clock, we will do the changing...but at least we won't be surprized as we were this AM.
lb

The Daylight Saving dates appear to be hard-coded per the manual:

• Start of Daylight Saving Time:
At 1:59.59 AM on the first Sunday in April, the clock will automatically advance to 3:00 AM.
• End of Daylight Saving Time:
At 2:59.59 AM on the last Sunday in October, the clock will automatically reset to 2:00 AM.

So the easiest thing to do is to change your time zone up or down one for the period between the new DST date and the old -- or you can buy a new SmartSet for about $15. The newer ones do not have the same problem.

I picked this up from the Emerson Website Read below before going to the link. Try thi link: and poke around the website http://www.fox-international.com/emerson/ Important Notice About Daylight Saving Time (DST) and Emerson SmartSet® Clocks and Clock Radios Congress recently passed a new Energy Bill which includes a provision to extend Daylight Savings Time. At the beginning of 2007, Daylight Savings time will begin on the second Sunday in March and end on the first Sunday in November. Because of this change your SmartSet® Clock or Clock Radio will need to be updated. In order to set your unit we will need the following information from you: 1. Model Number You can find your model number on the back or bottom of your unit. (Click here for an example) 2. Serial Number You can find your serial number on the back or bottom of your unit. (Click here for an example) Based on this information we can identify which setting is necessary to adjust your unit for compliance with day light savings. There are three possible groups your SmartSet® Clock or Clock Radio could fall into: Group One changes the time zone to a previous time zone. Group Two adjusts for the spring and fall settings. Group Three is already set for 2007 daylight savings compliance. Group identification begins with your serial number. The first three to four digits of the serial number represent the year and month of manufacture. (If your serial number begins with 0607, that would indicate July 2006, 506 would indicate June 2005.) Models manufactured before January 2006 (serial number 506, 512, etc.) will follow Group One settings. Models manufactured between January 2006 and July 2006 (serial number 0601, 0603, etc.) will follow Group Two settings. Models manufactured after July 2006 (serial numbers beginning with 0608) are Group Three and do not require any changes. If you believe you have a Group One model, please click here. If you believe you have a Group Two model, please click here. If you cannot determine which Group your model may be in, please call us at 1-800-526-7521.