Convert .82 to inches - Office Equipment & Supplies

1/2-inch X 82 1/4-inch
Current part number 532140294 replaces previous part numbers 140294 and 140294M

Hi Jill:
82 inches is just a shade under 6ft 10 inches so if a tall friend can lie in the back with a lunch box between his feet and the back of the seats, probably.
The other worry is will it fit through the door.
Measure height and depth and check against the door.

If you don't have a tape available, you can use a broom handle and a marker pen to get the sizes..

Futons come in a wide variety of sizes. I found you a great chart that outlines the various sizes of futons compared to mattress sizes.

Mattresses:

Mattress Size

Width
(short side)

Length
(long side)

Twin

36-41

72-76

Full

52-55

72-76

Queen

58-62

78-82


futons:

Twin

39x75 inches

Full

54x75 inches

Queen

60x80 inches

To convert from Polar to Rectangular
PRESS [SHIFT and -Rec] then enter the coordinate and angle
e.g. [SHIFT and -Recl]
Rec(15,0)=
r=15
0=0

There is no way to to modify or convert your PRO-82 to read digital signals, so you'll need a new scanner to follow the action. Check out the Uniden BCD396XT (handheld), BCD996XT (base/mobile), and the new Uniden Home Patrol.

Bill B.
Listening in since the 60's

32-EGR , 66-CONTROL SOLENOID CIRCUIT FAULT, 67-TORQUE CONVERTER CLUTCH CIRCUIT, 81-82-83-SOLENOID CIRCUIT FAULT HOPE THAT HELP U.

multiply by 12

ok,

so, you had built you pickups from some service center or branded.

there is a problem related to unbalenced flywheel management in engine when it was assembled that time some dust or any other particles jamed on bore.

so you have to now reopen you engine case & clean up your all part bore,pistons,crank case,perticularly flywheel attach to crank,

do with care,

takes time to get result but you will surely sceeded to fix this.

THNX

Are you sure that you only have 82 channels or does the receiver only go up as high as ch 82?