I have a microtek camera , not working , help me please

This has the same chipset as a Microtek Eyestar U2s and works on Windows Xp.

(XP DETECTS THE CAMERA - EXTRACT THIS FILE TO A FOLDER THEN USE CONTROL PANEL'S DEVICE MANAGER TO 'UPDATE DRIVER' AND POINT IT AT THAT FOLDER.)

If you are satisfied, please rate or/and leave a testimonial. Thanks!

I am sorry, but there is no windows xp driver for this model. You can try the compatibility mode in windows xp but I can't guarantee you that it will definitely work. If you wish to try, download the Windows 98 driver from HERE and follow THESE instructions to install. The instructions may be different but should be more or less similar. I hope you will be able to follow them. Let me know if you need further help.

Good Luck.
Thanks for using FixYa.

Drivers for MICROTEK SCANMAKER 3800 Link -1

Driver from Official Microteck Site Link-2

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

well I tell you what it seems like the only supported operating systems are windows 95 and 98 so here is a link you can also download the manual for it.
click here

If it works for you don't forget to rate me
thx

It will work with Xp you cna go to this site to get the driver. http://www.driverstock.com/ or tothe manufactures web page and download the driver for xp.

Try this

http://support.microtek.com/downloads/index.phtml

this should be your site for driver download , 2 ways to search by model # or product category , i assume you lost your original disk that has the driver . good luck

October 15, 2008

Dear Sir/Madam

Waht is the solotion that the Microtek Scaner 3840 CD driver loss, pls. help me what is the solotion

thanks:

Rhey

This camera drivers are for windows 95/98. Not worth trying to get it to work. Bud

Here you go.


http://support.microtek.com/product_dtl_2.phtml?prod_id=5