My polaroid pogo wont print

My PoGo wont pair with Galaxy S8 Suggestions please

I do not have the LG touch mobile, but experienced a similar problem with another device. It didn't work at al: I selected a photo, say print and sent it via bluetooth to the POGO, it didn't connect.
The solution that worked was: Not give a PRINT-command! Just SEND your picture to the POGO by bluetooth, and it will start printing.

Try putting the blue "smartsheet" registration/barcode paper through each time you turn it on.

have you put the paper in with the barcode card piece at the bottom and did this piece automatically come out when you closed the lid?

Be shure that the part to be printed is facing you and the "polaroid" logo is facing down

hello, i had this problem with my lg phone but i have found that if i change the picture name before printing it then will print via the bluetooth. hope that helps. sarah

If you are printing from a PC/Mac via Bluetooth, It won't accept anything other than Jpg's and also if the file name is too long (or if the file has multiple .'s in the name as I just found out)

first of all make sure that the pogo it turned off insert the paper from the packet with the blue peice on the bottom with the barcode facing down. and the paper facing shiny side up and logo face down. when you turn the pogo on the blue paper will feed through first then the printer is all setup and aligned ready to print via bluetooth or via USB cable. hope this helps

You can only connect the Pogo to a PC by using a Bluetooth wireless connection. Once a bluetooth connection is established between your PC and the PoGo you can print by simply using Explorer to send a JPEG file to the PoGo via Bluetooth (no printer driver needed).

I connect to my pogo via bluetooth with my laptop, To print a picture - Right click on the picture file and send to the bluetooth device.

I would love to see a rinter driver for it myself.