Question about Necchi 4575 Mechanical Sewing Machine

1 Answer

Thread balls up underneath - Necchi 4575 Mechanical Sewing Machine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Necchi Master
  • 7,365 Answers

Try these suggestions
1. Change the needle--use a needle that's for the fabric being sewed
2. Rethread the machine--top --make sure to use every thread guide
3. try a different bobbin--make sure bobbin is inserted correctly into the bobbin case
& make sure the bobbin is turned the correct way in the bobbin case
4. make sure the thread has not come off the thread take up lever
5. Clean under the needle plate & in the bobbin area for lint or threads
6. Check to make sure the bobbin is not warped or damaged
7. Make sure the bobbin case is correctly in the machine,, if it's a top loading bobbin you may need to have the bobbin case checked to see if it's damaged or see if the hook and hook race has a problem
8. Also could be a timing problem, and the machine would need to be checked

Posted on May 06, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having adjustment problems on my machine, it did not have an owners manual. missing stitches and bunching up underneath the meterial


Have you changed the needle ? Is the fabric a knit ? If the needle has been used for awhile, it may be dull. Many modern fibres are quite hard on needles, which need to be replaced fairly often.



Many knit fabrics require a ball point or Q needle.. [ Kenmore\'s brand of ball point knit needle]. Many knits are notorious for causing skipped stitches and a special needle for knits can really help with this.



If thread is bunching up, is this underneath or on top of the fabric ?

If it is underneath, the top tension may need to be adjusted. Mal adjusted top tension can cause a lot of problems, and the mechanism that controls it can become worn and may need service or replacement.

Oct 01, 2014 | Kenmore Sewing Machines

1 Answer

I can sew a few stitches did it all balls up at


Thread balling up in the bobbin case usually indicates that the TOP thread is mis-threaded (usually at the take up lever). Check with your manual for proper threading path.

Sep 02, 2014 | Sewing Machines

1 Answer

HD 3000 loops underneath work


It's most likely not the machine. It's the other things, ie needle, thread, etc. combination. For sewing knit, be sure to use a ball point needle. The needle eye size is important to so the thread is neither too small nor too large for the thread weight.

FWIW, it sounds like bird nesting. --the thread is not seated completely in the tension disk. Remove the top thread from the machine and ALWAYS RAISE the presser foot when rethreading!

Also, check that the tension is appropriate for the project. The two threads should meet in the middle of the fabric. If there is top thread showing on the underside of the fabric, the top tension is too loose. Tighten it until it until the top thread pulls the bobbin thread up into the fabric.

All About Needles SCHMETZ Needles

...

Dec 04, 2017 | Janome Sewing Machines

1 Answer

When sewing the top thread breaks and underneath the thread is all balled up. I have a Kenmore Mosel 385.17724.


it sounds like the top thread is not being pulled back up properly
make sure the machine is threaded properly with a new needle. (sorry for stating the obvious)
otherwise you can try
higher thread tension on top thread
larger size needle.
thinner gauge thread
different material

one or more of these should cure the problem

Feb 20, 2011 | Kenmore Sewing Machines

1 Answer

I have an omega 3730m sewing machine and i find that when i am sewing, the stitching underneath balls up nad is not tight. i tried to adjust the tension but nothing seems to work. any suggestions?


I find that re-threading both top and bottom threads fixes the problem. Sometimes the thread has not gone through the tension springs properly. try a new needle too.

Dec 08, 2010 | Necchi 6015 Mechanical Sewing Machine

2 Answers

The top stitch is fine but underneath the thread is all balled up what might be the problem


When the thread is bunched up underneath, the problem is often in the top tension. The top thread is pulled through to the bottom but because there is no tension, it isn't pulled back up correctly, creating large loops underneath.

Try making sure that the thread is lying correctly between the tension disks (you can just see them inside the machine on the downward thread path). Lifting the presser foot lever (behind the machine) opens up the disks and lets the thread slide between them more easily. They will close again when you put the presser foot down to sew. Make sure you always thread the machine with the presser foot lever up and tension disks open to avoid this problem in future.

If the thread is running correctly between the tension disks, just check that you that there's no fluff caught in there, holding them open. Give it a blow, or run a folded pice of fabric through there.

Nov 26, 2010 | Singer 2259 Sewing Machine

1 Answer

Bobbin thread is balling up underneath and not allowing more than a couple of stitches before jamming.


Totally rethread your machine and install a new needle. Your thread could be tangled. Usually the top threading is the culprit, not the bobbin. Check your manual, it is surprising, sometimes you think that you have it threaded right and it isn't.

Sep 06, 2010 | Sewing Machines

1 Answer

Bobbin thread is balling up in the bobbin case


try taking out the bobbin and turning it around if that dosen't fix it then you need a new bobbin case

Feb 01, 2009 | Sewing Machines

1 Answer

Necchi 4575


I've found that my machine doesn't like Coats & Clark thread; I have to feed it Guterman

Feb 06, 2008 | Necchi 4575 Mechanical Sewing Machine

Not finding what you are looking for?
Necchi 4575 Mechanical Sewing Machine Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...