ESO XS 18

If your UPS chirps repeatedly, and is connected to power, it generally indicates a failing battery(s). Your UPS's LED indicator which shows the status of the battery may not accurately indicate this. Typically UPS batteries don't last more than 3 years.

canon rebel xs faces late display on lcd taking 8 minutes especially in cold weather solution please

change the internal fan its a 18-24V type change it with a ball bearing type and yes a 12 volt will also work, with 120v input fine and under medium load the fan is only supplied with about 15 volts and only reaches 24 volts if the load shoots up or there is a power fail situation

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive.

Zooming is done from the lens on a DSLR, assuming you have a zoom lens on the camera. For example, if your camera came with the 18-55mm lens, you should see the numbers 18, 24, 35 and 55 on the lens barrel with a white index line next to one of the numbers. Turn the barrel to move a different number next to the index line. 18mm is wide angle, 55mm is 'zoomed in'.

Nope! The internal battery is not plugged-in correctly. Unplug the APC unit and open the access door to the battery (it is not dangerous to do).
Re-seat the two wire clips (red & black) to the battery. The positive post has a red mark on it.
Close it up and charge for a few hours before using.

If the symptoms continue, return unit to store.

I can help you fix the BUSY Error or Error 99 of your Canon EOS 1000D.

Installation of this Canon EOS 1000D firmware version 1.06 update will solve these problems:

1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.

See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

1. Follow this link to download a pdf version of the firmware installation instruction guide.
2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Maybe lens needs adjustment. The info on this page may help. Copy and paste this link for more info.


http://www.fixya.com/PostAnswer.aspx?thid=1841738&prdid=447928&ctgid=67