Please let me know how to proceed to get it started.. i think is not working at all as the door is not looking is only making a click but after selecting the program and psess start the button start blinking and nothing happens.. ihave few cloths inside but i guess it should start even empty as i will like to check it if it works or not to report on monday to the landlord... Thanks in advance
If the door is not locking properly the machine will not start. Try pressing the door closed firmly and if it still does not start its problem for the landlord.
SOURCE: door won't open Bosch Nexxt 100 Series WFMC1001UC Front Load Washer
The door sensor/ lock is not working well
SOURCE: washing machine
This deffenitly could be the brushes. Wierd sound normally comes from the electric sparking between the stator and the brushes. If it are not the brushes the best bet will be the bearing.
SOURCE: bosch Axxis problem
Thought these additional details might help as we are having a similar problem.
When the washer is turned on we get a blank screen, then after a bit we see the display flash. After sometime flashing then we see it go to normal and we can run it. It is as almost as if it need to warm up...
We can get the display to show faster, by playing with the knob. However, the machine still needs time before we can use it.
Any ideas?
Thanks in advance.
SOURCE: Bosch Classixx will not start
Just a guess, but it sounds as if the machine doesn't think the door is shut. Try pushing against it as you turn it on, if that works, then I'd guess there's a door shut switch that needs adjusting.
NOTE. This reply is from an amateur guesser who knows nothing.
378 views
Usually answered in minutes!
×