Frigidaire stove ples389dce oven makes a schreeching noise

How to Reset a Frigidaire Oven

1. Press and hold the "Bake" button for six seconds until "0°" appears in the display.
2. Enter the lower temperature at which you want to reset the oven.
3. Press "Self Clean" to reset the oven's internal temperature to a cooler setting

https://www.hunker.com/13409693/how-to-reset-a-frigidaire-oven

If your Frigidaire oven has a manual lock, slide the lock-bar to lock the oven's door. If it does not have a lock-bar, the oven will lock automatically. 3 Locate the "Clean" button on the oven's control panel. 4 Press the "Clean" button to begin the cleaning cycle.
https://www.youtube.com/watch?v=DSYUj3yGybY

Hello jnjpelli - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart the unit. If the oven does not turned on, then more than likely there seems to be a power supply issue. Also try checking the breaker and the power connections located on the back of the range. If any of these suggestions prove to be ineffective, connect with a professional to accurately pinpoint any potentially more serious issues

The "F1" error code indicates a failure of the Electronic Oven Control or EOC circuit board. You may find the oven gets too hot, fails to respond to input or acts irregularly when the EOC is malfunctioning or broken. While this code usually indicates a need for repairs.

Read more: How to Troubleshoot a Frigidaire Oven F1 Code ' eHow.com http://www.ehow.com/how_10004808_troubleshoot-frigidaire-oven-f1-code.html#ixzz2EhW21T4n

Good luck!

Unplug or turn the circuit breaker off to the unit for 10 minutes and retry. If you see no change then contact Frigidaire directly.

Here is the download link for Frig PLES389DCE

http://www.youserguide.com/wiki/Frigidaire_PLES389D





ALPUG
If this will help, please give my answer some ratings!

The noise you heard was probably the oven element short circuiting to earth. If the cooktop and grill are working then the fuses, internal/main must not have blown. If this is the case the oven indicator light should come on when you turn the oven on. If it does the oven element is definitely faulty and needs replacing.

rwere
Hello, and sorry to read about your problem.
Sounds like you have a general main board failure,
I suggest you call a service company

I tried to help you. Please help me and vote/rate my response thanks.

Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

I have the same problem. Any resolutions for you?