How to hook up a audio source eq 200 to a sherwood rx 4109 receiver

SOURCE: need remote code for sherwood

Comcast came and the receiver / tv was not capable of being run by another remote as far as volume, just off and on

SOURCE: sherwood rx-4109 power shuts off

The output transformers may-be gone
looking at +$50 AUS
for just the parts
or a licensed service
for about $150 AUS

SOURCE: trying to program my At&t Uverse remote to my

Sherwood Receiver/Amplifier 5027 Sherwood Receiver/Amplifier 5027

always press the mode key of the device they want to control before pressing any other key

Power on the device

1. Press and hold the appropriate Mode key (TV, DVD or AUX) on the remote control.
2. Without releasing the chosen Mode key, press and hold the OK key simultaneously.
3. Release both the Mode key and the OK key at the same time.
   All the Mode keys should flash twice.

• If it does not turn off, repeat steps 2 through 6 trying each code for the brand until the correct code is found.

1. Repeat steps 1 through 7 to program other devices if needed.
2. Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the Member's U-verse TV Receiver again, have them press the AT&T Mode key.

SOURCE: I need a code to

Hello! Try the link below this should help:
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf


Daniel Busa
DISH Network Customer Service

SOURCE: need the 5digit code for the sherwood rx 4109

Hi Woodyscarava,
You may look the remote code in this link http://www.comcast.com/corporate/customers/customer_support/remotes.html. Select the model of your remote control and view the manual.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.