Laurette Melodies in Motion (Model:QXM297BRH) regarding the timing of the melodies.

From memory, there is a switch on the back for music all the time or not at night based on ambient light. They all have it.

https://www.google.com/search?q=Seiko+Melodies+in+Motion+Clock+manual

Seiko Clocks - Westminster Owners Instructions

The Clock Depot https://www.theclockdepot.com > seiko_westminster_c...

NAMES AND LOCATION OF OPERATIONAL PARTS. Seiko Clock Manual 1 - Hands setting disk. 2 - Night time silencer. 3 - Chime melody switch.

Instructions for Seiko Dual Chime Quartz Clock Movements

Norkro Clock Company https://norkro.com > pages > instructions-for-seiko-du...
Move the night chime selector switch to the left most position. Moving in a clockwise direction, use the rear-mounted hand set to advance the hands until they ...

Chime Clock Instructions ' Setting Time ' Pendulum Clocks

theclockdr.com https://theclockdr.com > clock-instructions
Clocks with more than one chime melody: Change the tune selector only when the clock is not chiming. Timekeeping Accuracy: This type of clock will be able to

..

Here is a manual for the Seiko Melody in Motion Wall Clock, Model # QXM123BRH:

Getting Started

• Insert one "AA" size alkaline battery into the clock's battery compartment.
• Set the clock to the correct time by pulling out the time-setting knob and turning it clockwise or counterclockwise to set the time.
• Push the knob back in to the "Lock" position to finish setting the time.

Melody Selection

• Press the "Demo" button on the clock's front panel to listen to all the available melodies.
• To select a specific melody, press the "Melody" button repeatedly until the desired melody plays.

Volume Control

• To adjust the volume of the melody, press the "Volume" button repeatedly until the desired volume level is reached.

Light Sensor

• The clock is equipped with a light sensor that will automatically turn off the sound and motion sensors when the room is dark.
• To disable the light sensor, push and hold the "Light Sensor" button for approximately 5 seconds until the "OFF" indicator appears on the display.
• To enable the light sensor, push and hold the "Light Sensor" button again for approximately 5 seconds until the "ON" indicator appears on the display.

Motion Sensor

• The clock is equipped with a motion sensor that will detect movement in front of the clock and activate the sound and motion sensors.
• To disable the motion sensor, push and hold the "Motion Sensor" button for approximately 5 seconds until the "OFF" indicator appears on the display.
• To enable the motion sensor, push and hold the "Motion Sensor" button again for approximately 5 seconds until the "ON" indicator appears on the display.

Nighttime Silencer

• The clock is equipped with a nighttime silencer that will automatically turn off the sound and motion sensors during a designated period of time.
• To set the nighttime silencer, push and hold the "Nighttime Silencer" button for approximately 5 seconds until the "SET" indicator appears on the display.
• Press the "Melody" button to select the start time for the nighttime silencer.
• Press the "Volume" button to select the end time for the nighttime silencer.
• Push the "Nighttime Silencer" button again to save the settings and exit the nighttime silencer mode.

Troubleshooting

• If the clock does not operate properly, try replacing the battery with a new one.
• If the clock still does not operate properly, contact Seiko Customer Service for assistance.

Note: This manual is for general information purposes only and may not cover all features and functions of the Seiko Melody in Motion Wall Clock, Model # QXM123BRH. Please refer to the manufacturer's instructions for complete information on how to operate and maintain your clock.

The melodies should change each hour on it's own. You can change the melodies manually by pressing the demo button repeatedly. If the songs don't change each hour, you might try new batteries. I'd recommend Japanese batteries like Fuji, or Toshiba. I use Varta which is a German brand battery that's equivalent to either Duracell, or Energizer, and have no problems. If you've had the clock for a number of years, or have had it hanging in direct sunlight, or near a heat source it could be in need of professional assistance, and or repair. (if possible)

I would take it to a clock repair shop.
UsedClockparts.com

You may have a loose speaker wire connection or the speaker could be bad.

I would take it to a clock repair shop.
UsedClockparts.com

I would take it to a clock repair shop.

UsedClockParts.com

To test your Seiko Melodies in Motion Clock:

1) Check the volume knob in the back of the Seiko clock to make sure the volume has not been adjusted all the way down.
2) Make sure the on / off switch is set to on.
3) If it is extremely dark in the room, the clock will not play, it has a light sensor. Make sure the room is well lit.
4) There are separate batteries usually that operate the clock and the music. Change the batteries paying special attention to any acid / corrosion caused by old batteries. Clean out any acid and it should play. Also, be careful not to touch the positive or negative contacts on the new batteries, as this could inhibit proper connection.

If you have done each step above and it is still not operating, your clock is defective. Contact Seiko Service Center directly at: 800-722-4452 extension 3.

If you have had the clock less than a year, and it was purchased from an authorized dealer, it is under warranty, and any repairs will be free. Otherwise, there may be a charge for the repair.

I have a Seiko musical motion clock that I bought in Japan a few years ago. For setting the time it has a "A" and "B" button that you hold down? I dont have the instructions to set the time. It says "Radio Controlled" but the time was always manually set before by luck trial and error. How do you set the time?

mcdevito75 here, Sounds like 1 or both hands are hanging up on themselves or something on the face of your watch, look for a small watch repair shop in your area, or check here at fixya, bottom of page, click on repair service directory the watches.