Posted on Oct 27, 2007

All edges are cut off in 1080i display mode

I just started using the HD channels and whether I'm using an XBOX360 or my cable receiver in 1080i, all the edges are chopped off. I've been through the manual, and I've tried changing the 'format' (which cannot be changed in DTV HD mode). It's very strange because I was under the impression that HD automatically stretches to the correct resolution. That doesn't seem to be the case for me. The top AND side edges are cut off to the point were the bottom and side tickers on ESPN are barely visible. This is very, very upsetting and I've not been able to find help anywhere. Please advise!

1 Answer

Anonymous

Contributor 2 Answers
Posted on Nov 06, 2007

Anonymous

Contributor

Joined: Nov 06, 2007

Answers

Questions

Helped

269

Points

I have the same problem and have not been able to fix it either- i think it has to do with the glare screen on these TV blocking some of the viewable area.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How do I change my W2613 TV resolution to 1080i? I just bought this TV a few weeks ago and I want to be able to play my XBox360 in HD and when I connect all 6 wires (Red, White, Yellow & Green, Red,...

use just the red green and blue wires for the picture and NOT the yellow wire. That is why it is messed up.

XBOX games only play in 720, but it will still look great.

Read full answer

Aug 09, 2010 • Televison & Video

0helpful

1answer

Mitsubishi VS-60805 Rear Projection won't operate in HD mode with Cable Box

Since this is an older first generation (1999) HD TV it may not be compatible with newer HDTV receivers because the standards back then were different - Make sure the HD cable box is plugged into the HD component inputs on the back of the TV (not the DVD inputs) and that the menu setting on the TV is set to DTV (not RGB) video. This TV will only accept 480i and 480p signals on the DVD input. Also the HDTV input will only accept 480i,480p and 1080i (it will not work with a 720p signal,make sure your cable box is not set to that mode)

Read full answer

Aug 17, 2007 • Mitsubishi VS-60805 60" Rear Projection...

0helpful

1answer

Never been able to get 1080i hd through HDMI cable or uhf hd antenna

The programs u are watching must air in HD to get 1080i.Like ABC,CBS are air in HD most of the times.Press ur remote display button will see what modes the shows are playing on.Alot of the channels programs only play on modes 420i,720i modes are just DTV.

Read full answer

Mar 24, 2010 • JVC HD-52G886 52" Rear Projection HDTV

0helpful

1answer

Have hd cable connecting receiver to TV. Hd picture is ok, can?t watch any standard def channels.

U check the channels display?Anythings less than 1080i is standard def channels.

Read full answer

Mar 17, 2010 • Sony FWD-50PX2 50 in. Plasma Television

0helpful

1answer

HDMI XBOX360 Elite -"No Signal"

The connection order can be a key issue as to whether or not the HDMI signals will pass through the system. For best results the receiver should be turned on first, then the source device(s) and then the display. The reason for this has to do with getting the equipment to handshake properly for the HDCP protocol.

If HDMI video will not pass through your receiver, you may with to just connect the xbox using the component cables. Since component will pass through 720p and your TV is 1080i you should expect the same qualtiy and a more crisp picture.

Read full answer

Oct 12, 2008 • Denon AVR-2307Ci Receiver

0helpful

1answer

My xbox360 Wont work on my WS-55513 MITSUBISHI COMPONENT

Try changing the settings on the Xbox under display to 1080i. If it is 1080 p, or 720p, the image will look funny so make sure it is at 1080i.

Your welcome

Your friend from down the lane!

Read full answer

May 21, 2008 • Mitsubishi WS-55513 55" Rear Projection...

1helpful

1answer

Motorola DCH3200 Cable Box

Be sure that you took the time to force the output of the DCH3200 to 1080i. They do not seem to come set that way by default! This is true whether you are using either the component or HDMI output.

Power OFF the unit and immediately push the Menu key on the front panel. Using the remote, be sure that the 2nd line of the config is set to 1080i and not something less.

Read full answer

Mar 27, 2008 • Sony KP-57WS500 57" Rear Projection...

0helpful

2answers

"Not supported Mode" message

Hook up the component cables on the tv and the dtv box
go to set up on the menu select HDTV or display and deselect all of the 480i and 480p and in some cases also the 720 and only select 1080i to be display. you can then hook up your hdmi cable again and it shoud be supported. Let me know if that works.

Read full answer

Nov 18, 2007 • Samsung HP-R4252 42 in. Plasma HDTV

0helpful

1answer

Wierd problem

HD projection televisions have seperate convergence alignment for 480i-1080i thus your problem when you use your XBOX360. The "No sensor data" that shows up is due to the fact that the sensors need to be initilized after doing the convergence in 1080i mode. You will probably need a technician to do the alignment because if it is out that much then a template needs to be used to get it corrected. For now you can put your XBOX in a lower display mode until repairs are done.

Read full answer

Jan 30, 2007 • Samsung HCN4226W 42" Rear Projection...

0helpful

2answers

Signal from HD cable box occasionally gets scrambled/black out

Try removing 1080i from your list of available video resolutions in the setup screen of the Plasma display. If you are using a HD satellite receiver, check the LEDs on the front and note if the device is slipping into 1080 mode when the probem occurs.

Read full answer

Jul 11, 2006 • Philips E-Box FTR9965 DTV Receiver

Not finding what you are looking for?

View Most Popular

WS-55805 55" Rear Projection Television

Televison & Video

How do I change my W2613 TV resolution to 1080i? I just bought this TV a few weeks ago and I want to be able to play my XBox360 in HD and when I connect all 6 wires (Red, White, Yellow & Green, Red,...

Televison & Video

199 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Mitsubishi WS-55805 55" Rear Projection Television? Or just drag it here!

Related Topics:

All edges are cut off in 1080i display mode