Bizhab c350 c13c8 - Konica Minolta bizhub 350 All-In-One Laser Printer

What error code sir/mam?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

BIZHUB C350 SHOWING ERROR CODE C-0900 AND
NOW C-0950

C13C8 A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed.
When a new transfer belt unit is installed in a machine an internal component on the transfer belt unit changes state; this now indicates that the transfer belt unit is used
http://kmcopierservice.blogspot.com/2011/02/how-to-reset-transfer-belt-bizhub-c203.html

Read the manuals...

http://www.mordauntshort.com/assets/documents/Premiere_Manual.pdf http://www.retrevo.com/support/NAD-C350-Amps-manual/id/8043dj589/t/2/

It can be downloaded here:
http://www.samsung.com/nz/support/detail/supportPrdDetail.do?menu=SP00&prd_ia_cd=803&prd_mdl_cd=HT-C350%2FXSA&prd_mdl_name=HT-C350&srchword=HT-C350

Download and follow all instructions.

bizhub c350 is not installed properly, the driver you are using are the correct drivers.

You have to have a fiery unit (external controler) to use the C350 With a Mac because the c350 dosnt come with appletalk in the software. IC-401 Is the model number of the controller you will need to connect the c350 to any kind of mac for printing / scanning.

Clean the LED assy with the jig that you have inside the front cover.

I guess you mean the c350 is not printing while Windows said the job has been sent? If so, it may have changed IP Address from the time you first install the Printer on Windows. Check the Ports setting of the c350 printer! e.g.
Network Pritners should have Static IP address or at least a reserved DHCP IP Address. Logon to your Router, check the MAC Address of the c350 and reserve/assign it a IP Address near the end of the DHCP range. Save the Router configuration and power cycle the c350. Confirm IP Address changed to the reserved IP. 

Then you have to change all the PC's Printer Configuration of the c350's Port to update the reserved/assigned IP. Or remove the c350 from Printers and Faxes, then run the printer setup software again.

The Motorola c350 and c350 World phones are no longer supported by the Motorola Phone Tools program.

I will see if I can locate an English version of the Phone Tools program you need.