Bose Acoustimass 10 Series IV - Bose Acoustimass 10 Series IV Home Entertainment Speaker System - White

The subwoofer circuit in your amp will need to be turned on. Look into the speaker settings.

The output voltage on the secondary appears to be tapped at 22 and 16 VAC.

Denon AVR 3802 Operating Instructions Manual

The entire speaker system is passive. That is, it requires amplification for each channel.

From the manual: "Compatible with A/V receivers rated from 10 to 200 watts per front channel and 10 to 100 watts per rear channel; rated from 4 to 8 ohms".

There's a pretty decent write up for this speaker system on CNet. The "Speaker System" section calls for an amplifier capable of 10 - 150 watts RMS.

Bose maintains a library on their products as well. You can download FAQs, Manuals and Product Information easily. On the accessories tab, Bose lists an Onkyo receiver for $350 that will work very well with this speaker system. Of course, any quality modern stereo receiver or amplifier with power in this range 10 - 150 watts should provide good results, but better amps will be in the 75 watts and greater range.

I hope this helps - good luck

YOU'LL GET IT ON EBAY

I have one, in good order $300.00

see the user manual and set the speakers at proper spacing and direction

Yes, ur setting needs to be changed. On fliping the settings u will realise in one of the modes mostly the surround mode the speakers will work.

Thankyou
Appreciate a good rating from you..

Acoustimass 10 IV cable