SOURCE: problem with my viper alarm system on my 98' odyssey
first, you need to manuslly disarm the alarm. open driver's door, put key in ignition, turn on ignition, an then within 10 seconds push the valet/program button for a couple of seconds. (it is the little spring loaded push button that they installed with your system. probably in the kick panel or under dash
SOURCE: need to disarm the alarm because the remote is not
i have an 02 WRX my alarm keepes going off and i cant start my car and it keeps honking and honkin this viper system cam with the car n there is no button to press my blue button is flashing n my car is honking loud ! help! RPN 473V
SOURCE: I brought a car that has a clifford matrix 10.5
the reset button is under the dash somewhere. Different installers like to hide them in different spots look in the kick panels or just get in there with a flashlight I've had installers put them pretty far up there. just make sure you don't pull on any wires.
I have also seen an installer put the switch in the glove box so give that a shot as well.
SOURCE: would like to know what the bottom 2 buttons mean on Viper 7153v
the bottom button is for function shift, and is used (with aux button) to activate certain functions (add on optional features like trunk pop, window roll up/down, rear defroster, etc--all depend on car and install) or by itself for status updates (interior temp check-press once, release, press and hold; remaining runtime-press and release three times, press and hold; lock status-press and release twice, press and hold). it is also used with lock and unlock for silent arm/disarm, and also to enter valet mode.
SOURCE: VIPER 791xv. I lost the
Open the door, key to ON position,within 5 secs press the valet button one time, then press AND HOLD it the second time. While holding press the Lock button on the spare remote. Let go and turn off the car...your done.
97 views
Usually answered in minutes!
×