Question about Navy Seal Luminox Dive Watch

1 Answer

Replaced the renata #371 battery with a duracell d371. The watch still doesnt work. It working fine when i put it up on the shelf a week ago then just stopped. Is it the battery type?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Could be a duff battery - this does happen - even to duracell.

Try another battery - try and get a renata as was originally in the watch. Luminox usually use the Ronda swiss movement - which are pretty bulletproof movements. (i've got 2 Luminox - nice watches, prefer these of trasers)

If you don't get any joy with another new battery - send to the recommended sevice / repairer on Luminox website - prices are not that bad and you can specifiy exactly what you want done so it should not cost the earth - all prices are there to see.

US
Luminox Service Center
1024 Reservoir Avenue
Cranston, RI, 02910
P-401-946-0930
Toll Free-888-61-WATCH
info@saltzmans-watches.com

UK
Luminox Service Centre
Unit 11, NCR Buisness Centre
400 North Circular Road
London NW10 0AB


1) A brief explanation of the problem(s) that you are having
2) Your name
3) Your return address
4) Your email address
5) Contact telephone number
6) Your guarantee card (or proof of purchase)

Hope this helps

Posted on Jun 12, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I DO NOT HAVE THE MODEL OF BATTERY FOR Pulsar VX32 - X343 AND I NEED IT


Hi, your battery would be the renata 371. Type it in on eBay and it will come up

Apr 12, 2013 | Pulsar Watches

1 Answer

What battery does a Fossil Starck PH-1006 watch take?


Hi. I´ve got a ph-1030 and it works with a `RENATA 350`. I couldn`t d this reference so I bought a similar one.I got the `SR1130W` . This battery works but you have to place an small tape on the back (negative pole), to insolate the battery. You have to do it because this battery is a litle bite smaller than the renata 350. If you need anything else email to crbernal@hotmail.com

Nov 28, 2010 | Fossil Philippe Starck PH1035 Wrist Watch

1 Answer

What battery does a Oakley 2.0 Crush watch take


You need to buy silver oxide battery SR920SW made by Maxell, Sony, Panasonic, Toshiba and National, or, 371 made by Renata, UCAR, Eveready, Rayovac and Energizer, or, V371 by Varta, or, D371 by Duracell, or 605 by Bulova, or, 280-31 by Citizen, or, SB-AN by Seiko. Each named battery will fit your watch perfectly. Rate me, plz.

Jan 28, 2010 | Oakley Crush OAK0333 Wrist Watch

1 Answer

Watch still not working with a new Renata CR1225 Lithium Battey


while battery on its place touch the 1 End with battery and secound with AC small Gold dot

from
AmFix Jewelry & Watch Repair
203 N. LaSalle St
Chicago, IL 60601
Ph: 312 641 7000
Email: info@goamfix.com
Web: www.goamfix.com

Sep 13, 2009 | Casio W94HF-3AV Wrist Watch

1 Answer

Need replacement battery for the above


I had the same problem. My jeweler came up with a solution. He "dibbled" the rear of the case just enough that the next smaller Renata battery would fit. You can't tell that he did anything but it worked. Hope this helps.

Apr 21, 2009 | Watches

1 Answer

Watch going in reverse


There is no difference in watch batteries as they are produced by the certain standards. That means you have replaced the right battery.
The simplest solution would be re-replacing the battery. Just take the battery out and leave the watch without battery for 5 minutes, then put the battery back. Make sure the battery is fitted the right way (the + side usually facing up).
If this doesn;t help - let me know.

Rate, please.

Mar 23, 2009 | Watches

2 Answers

Raymond weil tango


I suggest taking the back cover off, removing the battery and reinstalling it again. Make sure the battery is installed correctly and is the exact type. Its very easy to put them upside down, Sometimes it may take a couple tries.

Jan 15, 2008 | Raymond Weil Parsifal W1 watch

Not finding what you are looking for?
Navy Seal Luminox  Dive Watch Logo

1,390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navy Seal Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Ekse

Level 3 Expert

13434 Answers

deton8 von Splosion

Level 3 Expert

3335 Answers

Are you a Navy Seal Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...