I am not able to open 192.168.0.1 this

Here is a link to the install wizard. The wizard is the easiest way to set it up.

Click here and save the file and then open it for setup.


ftp://ftp.dlink.com/Gateway/dir615/Apps/RouterSetup_dir615_410.exe

You need to access the Setup page of Dlink DIR 300 wireless router:
1. Use a working computer that is hard wired to the router.
2. Open a Web Browser (IE, Firefox etc.) on the computer.
3. In the address bar of the browser type http://192.168.0.1 and press Enter.
4. When the login window appears, set the user name to admin and leave the password box empty. Click OK to continue.
(Note: If you setup your own Usename and Password on your router please use those info to login instead of using the default)
You will then see the Setup page of the router.
5. CLick on the ADVANCED tab.
6. On the left side of the screen Click on Parental Control.
7. On the "Configure Parental Control below: " select the option "Turn Parental Control ON and DENY computers access to ONLY these sites".
8. ON the "Website URL" tyoe in the website that you want to block
9. Click on the Save settings button.

Once completed then the sites you entered are completely denied and blocked on your router.

you can download it from http://www.ziddu.com/download/11286573/DlinkWBR1310Router.zip.html

you need to replace your modem with a router that is capable of running Network Address Translation. You are trying to route private IP's (192,168.x.x) over the public IP (internet) network.

You don't connect to WAN port, you need to connect it to one of the switch ports. The wan is strictly for modem configuration

you don't need to install a router on a PC. The wireless card or ethernet cable should talk to the router.

To change the administrator password on your router, open a browser and type in the URL of the router's configuration/setup IP address (not sure of the Dlink maybe http://192.168.0.1) and got to change administrator password.

Here is the link to the manual for your router. Follow it's instrunctions to login into the router and from there you can run the setup wizard. If you feel comfortable in doing so, you can set the wireless configuration manually. Please reply if you need specific assistance.

http://74.125.93.104/search?q=cache:FT1VlyIdfuUJ:ftp://ftp.dlink.co.uk/dir_products/dir-301/DIR-301_Manual_English.pdf+dlink+dir+301&cd=5&hl=en&ct=clnk&gl=us

Good luck and thanks for using FixYa!

try opening the ports on your router go here to find out how to do it

http://www.portforward.com/english/routers/port_forwarding/Dlink/DIR-300/DIR-300index.htm

just open the dlink ip homepage and configure the wireless settings



sagar