Download setup router wrt54g2 v1 - Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)

SOURCE: i need installation software for a linksys WRT54G2

router do not normally need installation software..

you can access their admin software by putting in the ip address into your browser...

if you are running xp go to start > run and type in "cmd"..

when you get the black DOS screen, type in "ipconfig" and look at the results for the ip address of your "Default Gateway"..

go back and type this into your web browser to access the router...

for linksys the default password is admin, leave the username blank

Prashant M

• 2278 Answers
• Posted on Apr 01, 2010

SOURCE: I need a free download driver for wrt54g2 v1

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

SOURCE: i lost my start up **** for my linksys wrt54g2 v1

You can download it from here,

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G2

Select XP, Vista Setup wizard download.

Don't forget to give me a good rating as well as your vote.