Fwdc110p bin file - Pentax Optio S Digital Camera

Layout.bin Biohazard 4 Download · eaninanccesel · Disqus

https://disqus.com/home/discussion/channel.../layoutbin_biohazard_4_download/

Request file Help How to download resident evil 4 layout bin file download file to ... for layout.bin file like "please insert disk 1 that contain the file layout.bin"but I ...

Theres a firmware update, try this

http://www.4shared.com/dir/2953073/a0908d81/sharing.html

Normally, .bin files of BIOS are not published for public on websites. Contact a chiplevel technician. BIOS.BIN files are the asset of a technician. So you may need to pay.

Have you gone to the support section of the Pentax website?

download the Java Development Kit for your specific operating system from the sun java website. For windows, the installer will be an executable file so just run it and follow the prompts.

For linux, ubuntu or debian, Download the jdk bin file. Go to your terminal or konsole then set yourself as a super user and run the file by typing ./jdkxxxxxx.bin or whatever your bin file was. For mandriva and red hat, download the .rpm.bin file. run the bin file and it will load the rpm file. Just follow the steps.

For Mac. I think Mac does not support that version yet.

I hope this helps.

A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.badongo.com/file/707791

B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...

Important!!! Insert a fully charged battery or connect to an external power source.

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware: Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voile...the Secret Menu appears!

Using the down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly! Only thing is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip!

OK Guys...After fidgitting for hours on this with the bits & pieces on this forum & on others...here's how I got it to finally work:

A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.pentax.de/mediapool/attachments/photo/100/104/46139/fwdc110p.zip

Optio S4, S4i & S5i shall use another file. Don't really know for S4 but for S4i & S5i, there on the Pentax customer service website at:

http://www.pentaximaging.com/customer_care/software_firmware?sfFlag=f

B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=1020

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware:

Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voilà...ze Secret Menu appears !

Using the down toggle of the OK button, go to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly ! Only thing, is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip !

I had the same problem.
After starting up 20 or 25 times with the fwdc110p-file the problem was fixed.

http://www.badongo.com/file/707791
You can download the file from the above site - I think this might be the exact reference. Then go to the most recent entry on this site for the secret menu process http://forums.steves-digicams.com/forums/view_topic.php?id=82905&forum_id=24&highlight=A90

Rember to place it on your card at the same level as the DCIM file, not inside it like I did at first. It came zipped so you will need to use Winzip. I will now try and polish this a bit on that site while it is still fresh in my mind.

A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.badongo.com/file/707791

B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...

Important!!! Insert a fully charged battery or connect to an external power source.

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware: Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voile...the Secret Menu appears!

Using the down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly! Only thing is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip!