Hannstar k mv 4 94v 0 schematics - Computers & Internet

SOURCE: Need bios update for Hannstar J MV-4 94V-0

I am sorry to say but, I think  your prombelm is that the cpu is the wrong size if you want it to run at that pro speed youneed to get a dual core instead a single core and update the bios then lala linda I hope this helps 

SOURCE: HannStar J MV-4 (jumper clearcmos/reset

The location of the jumpers or dipswitches may vary; however, here are some locations of the jumpers / dipswitches.

1. On the edge of the motherboard - Most jumpers are located on the side of the motherboard for easy accessibility, verify by looking at all visible edges of the motherboard.
2. By the CMOS battery - Some manufactures will place the jumper to clear the CMOS / BIOS password by the actual CMOS battery.
3. By the processor - Some manufactures will place the jumpers by the processor of the computer. However, note that in some cases these jumpers will be to change the processor and not the password.
4. Under the keyboard or bottom of laptop - If you are working on a laptop computer the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.
5. Other visible location - While it is possible that the jumpers / dipswitches may not be in a visible location, most manufactures try to make things easier by placing the jumpers / dipswitches in another visible location.
6. Jumpers may also be found underneath or allongside the memory modules.

SOURCE: in fujitsu simens amilo pi

best solution i can give you http://www.softpedia.com/get/Security/Decrypting-Decoding/CmosPwd.shtml

SOURCE: I have an Acer 5570z

goto "google " search and see what it throws up

SOURCE: hannstar J MV-4 94V-0 0651"

If you know how to remove the CMOS battery on the motherboard of your laptop this will solve your problem. The BIOS password is stored in CMOS memory that is maintained while the PC is powered off by a small battery, which is attached to the motherboard.
Removing the battery will reset the CMOS information/data including the password.
Of course after you have done this you have to re-enter the correct CMOS info in order for your laptop to function properly.


Good day.